saint

bump, this has been sat in my store room for half a year. I'll take it down to £40 delivered, they retail for almost double that new! Why get a cheap fleabay camera when you can have a highstreet branded one 2nd hand for the same price?

bump, I still have these and I'm reducing it to £60 all in colelcted from Sheffield, or I can move them to my other place in Crewe but I'd want the full price. Sorry if I didn't get back to anyone above, I was out of the country for a while and never saw the messages. Looking for a quick sale here.

Wouldn't that cause an mot fail? It sailed through last weekend. I thought that'd be an eggy sulphuric smell? Easily tested, decats go in next week

I've noticed the drivers side of my engine bay absolutely stinks of something burning, and the smell starts coming into the cabin with air con on. At the same time I see somethings leaking onto the undertray, and the engine is getting far hotter on that side than the left. The heat is enough to get you sweating on the drivers side of the engine bay, but the passenger side is really cool. The fans also kicking in a fair bit. Any pointers on what could have gone awry around here? I can't see anything obvious from the top, but can someone who knows the engine bay better suggest whats down the front of the engine around the drivers side? Please don't say water pump

Interestingly, the 350z locking nuts go on ok, as do the normal ones, you just have to tighten the life out of them. The seats for the lugs will no doubt be trashed but the wheel definitely isn't loose. To be safe I got 4x370Z standard bolts all round and used the locking nuts that came with the car. A note on wheel spacers in case it helps future people - not much room for spacers on the rear with the 370z rays on, and the main issue with the front spacer is that although 15mm ones do clear the caliper (on mine at least) the nuts holding the spacer on sit proud of the spacer which then clash on the inside of the rim and stop you from having a flush touching condition. 20mm spacers have deep enough holes for the bolts to sit under-flush. I thought I'd try my luck before swapping them over

How sure are you, tarmac sportz say their 370z nuts are tapered as are the 350z ones. I dont get how installing them on a 350 instead of a 370 would mean they no longer can be tapered.

Looking for a pair of gaskets to fit a 2005 DE 350Z, the triangular ones that sit between the exhaust headers and cats. Can pay anything up to the price Nissan want...

Cut it up, cut out the number plate recess, and I'll take that. I'll use it for making a mold! It's free Makes his life easier if he just cuts it up and bins it. Bin everything except my bit . Its better than having a full bumper eh?

Cut it up, cut out the number plate recess, and I'll take that. I'll use it for making a mold!

For the nuts, do I just get any marked as 370z, say the ones on tarmacsportz store? I'm guessing the spacer has to be a 350z one and not a 370z, although some threads say they are basically the same thing. And last question - so should I remove the rear spacers I already have? If they still fit I'd keep them!

Hi, I'm getting some 19 inch 370z rays at the weekend, and already have 15mm rear spacers. To save me trying, will they still fit? Car is standard ride height While I'm at it...20mm is the minimum for the front yeah?

The watch that does 0-60 in 60 seconds... because thats how long a minute is.

01 MrsNiki + 1 - Hotel booked 3rd/4th June 02 Buster and Mrs Buster - Hotel booked 3rd/4th June 03 Andy and Katrina - Hotel booked 04 ATTAK Z - Sunday drive + lunch (Hope I'll be able to keep up in my non-Zed ) 05 Paul K and Mrs K - Hotel booked 3rd/4th June 06 Davedutch and Mrs - no need for hotel 07 Shezza + 1 - Hotel booked 3rd/4th June 08 Jetset + 1 - Hotel booked 3rd June 09 Spoons + 1 - Hotel to be booked tomorrow. (brand new Z owners, looking forward) 10 Mr & Mrs N13gey - Hotel booked 3rd/4th June 11 Stoker 11 + 1 - Hotel booked 3rd/4th June 12 Brummiestormer No hotel needed 13 Gudzy No hotel required (Not in a zed) 14 Spatt No hotel needed (looking forward to both drives and I'll be around on the Saturday night) 15 350zedd + 1 Hotel booked 3rd/4th June 16 Zedd. Hotel booked 3rd/4th June 17 James Junior - will book hotel shortly 18 Saint (maybe with passenger) - No hotel needed, somewhere between spirited and relaxed!

Did you get my follow-up message about steering wheel controls?

Can you put me down for a DE Motordyne basic spacer? I nearly bought one at full price...typical me Edit: 1. Deano94 - 350z DE ART test pipes 2. delz0r - 350z HR ART test pipes 3. GreenLandy - 350z DE plenum spacer - basic 4. S7nny - 350z DE plenum spacer - basic 5. SamU23 - 350z DE Basic Plenum Spacer (potentially ART decat and XYZ depending on price) 6. Zippypooz - 350z TDX v2 Catback Exhaust System (potentially!) 7. Hon - 350z TDX v2 Catback Exhaust System if the ark deal doesnt go through 8. veilside z - 350z DE ART test pipes + 350z TDX v2 Catback Exhaust System + 5/16 Copper Iso Thermal Plenum spacer 9. mj86 - 350z DE ART Test Pipes + Motordyne XYZ with HFC (depending on price) 10. ConnorW06 - 350z HR TDX2 Exhaust + ART Pipes (potentially, depending on price) 11. Saint - 350z DE plenum space - basic 12.

Thanks to the various people for helping me out with parts, got most of them now so...[b]time to update the list! [/b]If you know anyone with these parts laying around unused then I'll have em

diddums, I went for a full engine bay overhaul with MopedMark! Hows March?

I'm very tempted to join in, and I wont need the hotel since its a whole 2 miles from my parents house. I'll just have to find a way to distract my old man so he doesnt insist on riding shotgun.

Mine still hasn't arrived yet, its been 2 1/2 weeks? I thought we'd agreed to send it separate to the slam panel, which has a long lead time?

Subscribe to forum updates, I'm like a hawk on these threads! Warning: may lead to excessive spending.

I'm no longer after the gear knob, think I'll save my pennies for the aluminium version

I already PM'ed for both at 17:15

lol, I call dibs! I commented the same thing on the facebook group

Saw what I think is an "Athens Blue" 350GT between Mcdonalds and Morrisons in Crewe. Seen it around a few times near the retail park, nearly got one instead of a zed! Silver DE with black painted alloys parks up in the Bentley Motors car park every morning, I park a few spaces down if I get my arse in gear before the spaces disappear. I've seen a few other zeds at work, anyone else working at Bentley own a zed?

Damn Scott, spent all my pennies on the engine bay! If you somehow have these come Feb 15th I call dibs, they're next on my list