Flashback

4 hours ago, docwra said:

Mine was done in metal ......... after Id driven it into a ditch, Id never have done it otherwise 

My arches were probably about 80mm extended each side and the wheel specs I was running were faintly ridiculous - 18x10 ET -35 front , 11.5 ET -25 at the rear or something, wheels like that dont come up very often and spacing wheels for widearches is not acceptable ........



and it ended up white, notice how much has been added to the Chargespeed bumpers to make them fit with the arches:

 

It does look lovely though. Where did you get the paint job done?

Hi Mik of course you can, just give me a pm.

Quote

Here's the other two photos for the passenger floor mat and the wheels.

Hi all, 

I've a few bits that need a new home after an early spring clean, so if they'd be of any use to you then let me know.

First of are some 5mm universal shim spacers that I have, nothing special but if you want them they are yours for free, just pay the postage. Fyi as with any spacers you may need longer studs fitted dependent on your wheel design and offsets.

Next is a good old OEM Bluetooth module first me 80 quid way back then but happy to let it go for 20. Be warned you need a pretty old phone for it to be of any real use, modern phones just won't work on it too well.

Thirdly I have some brand new Whiteline ARB bushes, front and rear.  I didn't need them when I replaced mine ARBs as I had some nice Superpros to go on instead. £45 for front and rear together.

On 11/12/2017 at 22:33, Andy_Muxlow said:

1. Andy James + Kat
2. Shezza
3. Valy
4. Keyser
5. Paul k + Dawn
6. Nso93
7. Humpy
8. G1en
9. Rickdon
10. VeilsideZ
11.  
12. Bob94
13. Buster and Netti
14. Winkj(if I get her back)
15. Teejay+1
16. Flashback
17. Modo +1
18. TT350 (try)
19. Papa
20. Olly350z
21. Louis350z (not on here)
22. alexclabbs
23. Jay84

 

as the zed has now gone I'd better take my name off the list.. I will come along and visit if that's ok?

What happened to it Andy?

1. Andy James + Kat
2. Shezza
3. Valy
4. Keyser
5. Paul k + Dawn
6. Nso93
7. Humpy
8. G1en
9. Rickdon
10. VeilsideZ
11. Andy-Muxlow +1 possibly
12. Bob94
13. Buster and Netti
14. Winkj(if I get her back)
15. Teejay+1
16. Flashback

7 hours ago, coldel said:

Again it depends what you call excessively marked up. A company marking up a product by 20% is not excessive by any stretch and although larger chains do report into a wider network and they can better survive harder times ultimately every dealership has targets they are measured against and if they fail consistently the long term result is closure of that branch.

 

The company I work for sells a service, the numbers I stick to on pricing for our department are COGS <35% and margin >30% otherwise we may as well be a charity/NFP. The numbers in the OP are not in any shape or form a rip off in my view, in fact its less than I thought dealers would be aiming for.

I agree with you there @coldel as the money they are making would make being in business seem pretty pointless.  It wouldn't even pay for a day or two of being open with all theiroverheads.

I went for MeisterR GT1s and have to say they are great.  Whichever you decide on make sure you apply an anti rust coating to them when they go on and then every 6 months.

Looking sweet Andy

It's not too far from me so might pop down depending on when.

Not seen either of those around the area, but will keep an eye out so as not to get sideswiped by crap driving.  The second one had some pretty distinct stickers on it.

It's a bit of an old one but playing Killzone Shdowfall right now..

I just wanted to send a massive thank you to Craig and Graham @ H-Dev for the truly awesome set up they've performed on my suspension.  The car is a completely different beast now and is just amazing through any twisty stuff. 

As always the guys  were fantastic during the work and although I missed her dearly, the week it took to do this was completely worth it.

@Jez @ H-Dev @Gareth@h-dev I salute you and the team!

Welcome 

Stunning as always @Mopedmark!

Haha yet again you indirectly convince me to part with my hard earned cash Andy.  I'd love mine to be half the car the Phoenix is!

Glad to know she has such loving owner and enjoy it every time I get to see her in shows or on track.

Yes had a good time despite the weather. Great to see everyone!

4 hours ago, coldel said:

There is no need to bump this, you posted it up at midnight and no one has responded by 9am. Some common sense required here along with some patience.

7 minutes ago, Tarmac@TarmacSportz said:

 

Got to be Teins 

 

They are about the shallowest drop

 

https://www.tarmacsportz.co.uk/tein-nissan-350z-z33-s-tech-springs.html

 

Thanks Chris but I've already got some Meister GT1s. They're fully adjustable the question was in mm how far to lower, 10, 12, 15, 20 etc. 

Bump

welcome along 

On 8/23/2017 at 15:29, Olly350z said:

According to the advert this was a Nissan Quashqui (Spelling :/ ) fob. Little bit of trimming and filing and everythings gone in easy. Lock and unlock all work so just waiting on getting the key cut then we'll see

How did the key turn out in the end?

Hi All,

I'm currently redoing my suspension, re-bushing all over with new adjustable coilovers.  I was originally thinking of a modest 10mm drop as I drive this on the road as my daily, but now I'm thinking if I should go a little bit more.  What does everyone think would be a good drop?

My set up sat on 19s with 265/30 and 295/30 front and rear.  Rear arches rolled.

Not looking for any speed bump hassles or indeed slammed in any way.

Cheers!

That's a lot of cash there!  Did you find out where they were off to Paul?

3 hours ago, Mopedmark said:

Hi guys, sorry  i didn't get to book on the club stand but I managed to get the the old girl on the Fast Car, Car Culture Collection stand  so I will be meeting up with you all throughout the day

 

Loving the piccie Mark.  See you there!