Jump to content

Hooch

Members
  • Posts

    429
  • Joined

  • Last visited

Everything posted by Hooch

  1. Do the Bose hack, add a USB power socket from the front cig lighter and add one of these bad boys http://www.ebay.co.uk/itm/Bluetooth-A2DP-Audio-Music-Receiver-Auto-Car-Radio-AUX-AMP-Home-Stereo-Speaker-/231013811746?pt=UK_Mobile_Home_Phones_Bluetooth_Acc_ET&hash=item35c97f0622 That's my plan, when I get round to it!
  2. I have a scorpion and its an amazingly well built piece of kit. It gives a more powerful sound without being to loud. With some berks its will sound like the dogs danglies.
  3. All the voice things are in the owners manual
  4. Hooch

    Flashers

    Iv given a few flash's/waves but nothing in return yet. In the scoob I always got something back!
  5. Tweeters are behind the plastic covers by the wing mirror. Door card off then pull the plastic and it clips off, be careful as the corner slips under the rubber door seal.
  6. Yeah got them now, only one set I'm afraid, his misses bought them for her dad but he got rid of the Zed as he kept getting speeding tickets
  7. 6, brand new. Can't say no really, got a rough idle so might resolve it.
  8. A mate of mine at work has a set of NGK Laser Platinum spark plugs for the older 350z so will fit mine (PLFR5a-11 6240) Hes only selling them to me for a tenner so didn't know if you guys thought it was worth it? I did want the Denso's but as these are so cheap it must be worth it?
  9. Scorpion is a lovely sounding exhaust. Not loud but sounds like an M3. Powerful sound.
  10. To change the bulbs the whole unit doesn't need to come out, just the clear plastic covers
  11. eBay 'sticker bomb book' A whole book of stickers, everyone loves stickers. Not my thing but if its was a older dub car I would probably do it.
  12. As title says I have some Genuine Nissan Clear Reflectors to fit pre-facelift Zeds. Brand new and never fitted, bought from craig350z. £30 posted ONO Or £25 posted no offers
  13. Exhaust heat shields? I have heard that stones can easily get caught in one of the mid heat shields above the exhaust, could be that?
  14. Slip a thin blade behind the clear plastic on each side and leaver out. Replace bulbs and click the plastic back on. Its easy, give it a try.
  15. I went for these: http://www.ebay.co.uk/itm/2X-Pure-White-6-SMD-1210-LED-31mm-12V-Car-Interior-Festoon-Dome-Light-Lamp-Bulb-/281052978818?ssPageName=ADME:L:OU:GB:3160 Perfect, with any leds in the dome they will stay all the time very very dimly (only visible at night) and wont drain the battery. DON'T GET ANY WITH METAL BODIES THAT WILL TOUCH BOTH CONTACTS AS IT WILL BLOW A TRACK IN YOUR BCM.
  16. Keep trying the pedal dance, its all about timing.
  17. Ahh JOBD, handy to know!
  18. That I cannot answer, strange its just the right one. Might be worth looking at your BCM board to see if its caused any damage. A few things here might be worth trying: http://my350z.com/forum/maintenance-and-repair/463735-bcm.html
  19. Peteman does have these and they do look awesome, he's to young to deserve a car like this so he should sell it and give the rims + coil overs to me.
  20. http://www.350z-uk.com/topic/45398-bose-phono-ipod-hack-guide/ The search function is your friend for headunit advice and rear camera. You will need the right adapter when replacing the HU on a Bose system. If you change this and the sound is really quiet you will need to perform the Buster mod, that can be found by searching as well.
  21. Make sure your not using LED bulbs with the heat shield on the rear as it will short and blow a track on your BCM, this will then have to have a wire soldered on to sort it. Bad: http://www.ebay.co.uk/itm/39mm-3-SMD-5050-Pure-White-Dome-Festoon-CANBUS-OBC-No-Error-Car-3-LED-Light-Bulb-/330928707508?pt=UK_Motorcycle_Parts&hash=item4d0ce357b4 I used these and work perfect with a lovely white light: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=281052978818&ssPageName=ADME:L:OC:GB:3160
  22. Also interested on why the butterfly valve cannot be moved, mine has a slightly lumpy idle when warmed up, the rev dial moves ever so slightly and you can feel a bit of vibration through the car. I think i'm going to clean the throttle body and MAF to see if that resolves it, if not new spark plugs. Surely a throttle reset would resolve any issues after cleaning? EDIT: Looking into it I can see a lot of people having problems when cleaning the TB. Did you resolve your idle longsh07?
  23. Why is it worth a punt. It wont work with a jdm. No one said previously it wouldn't work with a JDM. If someone has posted that I wouldn't have said it was worth a punt?
×
×
  • Create New...