Mopedmark

Well there is only one connection so I would be careful when you come to this,just see if it is pressed all the way home, either way take it apart have a look at both ends and see if its clean or dirty etc give it a blow so to speak make sure there no dust etc, generally see if anything is a miss

That's good then,so I would think that the sender is working otherwise it wouldn't be able to calculate the fuel. Have you checked connections into the clocks

That's an optical illusion from the way the photo has been taken

ooooooo k

Does the DTE work on the gauge ?

All most certainly suspension problem I am running 20inch with 275 and 25mm spacer and mine touch the inner side of the arch a paper thickness only when two up I am going to roll the arches but yours shouldn't touch.Get that suspension checked

along where about are you ? West Mids is the place

Yay at last,looks good

Try the Audi tittttttttttttt forum

Nice Blades

You sorted it out now mate

along

along, Cosford, Cosford, come to Cosford

Hello and

Was this the Midlands Event of the Year The BIG One, us Midlanders must av missed all the post about that one, still, we can organise one for ourselves next year can't we I4N

Hello and along perfect colour choice

Oh yer no problem really two ways to do it.First and easiest is that you can just pop the pip so to speak we're the wire joins the plate you can just press the pip out then pop your new one back in.Second you can undo the two screws and with a bit of wiggling you can remove the plate and the petrol flap will come out as well,take pics as you go so you know how it goes back together.Its pretty easy as you go through it

Show me a pick mate I have all mine off and cleaned and such like

Very niiiiice

Brill mate the are subtle but look good when fitted especially when other Zedders see them

Thanks for that BillyZed did you fit the covers ok

along

Read the pm mate