EvansJD2112

Any that physically fit under would work. You'll then need to tap into the sub output of the headunit. The kit I got from R35audio came with the adapter cable; just plugged into the back and the original cable then plugged into that. Has the 2x RCA cables for the sub. And, of course, the power feed from the battery. Hardest part will be the adapter cable. Maybe you could tap into the Bose amp rather than back of headunit.. not sure about that. I had a Pioneer under seat sub in my old MR2. Worked surprisingly well.

Could you get on under the passenger seat? https://www.caraudiocentre.co.uk/category_m-underseat-subwoofers_c-2741.htm

Final stage.. cutting the new carpet. Quite pleased

Stumbled across this full kit whilst randomly browsing. Fitted today. Really easy with excellent instructions that include step-by-step pictures. Sounds great so far. Not had time today to fiddle with the settings. Took about 4 hours to fit. URL for the kit: http://r35audio.com/product/370z-subwoofer-kit/ I've ordered a cheap rear mat to cut a hole for the sub to show through and some edging to make it look semi-professional! https://www.bootliners-uk.com/bm/nissan/370z/601 https://www.amazon.co.uk/dp/B012BS9YJG/ref=cm_sw_em_r_mt_dp_U_vqMDEb2HYH039 The speaker guard comes black.... I just happen to like bright orange :-) https://www.amazon.co.uk/dp/B07XDR3KGL/ref=cm_sw_em_r_mt_dp_U_VrMDEbWZ5Q3KH The remote control is not part of the kit from R35Audio, bought separately

and now I want to get my car wrapped.... that looks stunning

I had my EcuTek remap last year and keep looking at this on and off. Other than data logging and switching maps, what other benefit would I get on an Auto 370z ?

PM sent

Year 2 service due next month. Plan to take Lockwood & Greenwood as I took my 350z there way back. Used TDI North last year and had EcuTek remap at the same time. This year want to use a garage that also do MOTs; prep for next year. Anybody used Serviceyourcar in Buckley ? Was recommended to me on this forum for my 350z but sold the car before trying them.

For anyone interested and to keep the thread updated should anyone else have similar in the future... Nissan now plan to replace the motor tomorrow.

Giving Nissan until tomorrow, then will collect car. At the moment they are getting thing to try from Nissan Technical.. Not much confidence right now!

Not sure we are on same topic:-) I'm talking about when you open the door, it drops to allow you to clear the frame. When you close the door, it should pop back up again. Mine isn't popping back up - passenger door only. Usually the reset procedure works - had to do many a time on previous Z's

Had similar in our motorhome. If not used for a while and its been cold, get a fogging on the screen. Clears after a bit of driving with the head unit on.

Mine definitely auto-returned when I picked it up. I had to do the reset procedure for both windows in the garage before driving off.

Hey.. looking for any guidance I noticed that my passenger window had stopped auto-returning. Tried the usual reset but without luck. Finally get it booked into Nissan (under warranty) to look at it. So far they've not identified the issue. Other than trying the reset, they've tried replacing the window switches - no luck. Unsure how long it's been broken - 99.9% of the time I have no passengers or need to open the door. Any ideas I could pass onto Nissan? I did have a Ecutek remap done last April; any potential that that could have caused it? Cheers Jon

Short clip of the Ark Grip & Cobra HFCs on my GT Auto. Had them moved to my new 370z in 2018 - still sounding awesome. Been asked a few times what the car is (it's debadged) and comments on how great it sounds. ArkGrip v2 + Cobra HFCs

I used aCarputer on an Android tablet linked to a basic Bluetooth. Doesn't seem to be on Google Play any more. If you Google "aCarputer" you'll see some pics and no doubt some APK hosting sites that have copies

Edit.. Also just tried below. Had to reset the drivers window after disconnecting battery, that was ok. Passenger window still refusing to play ball. ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement INFOID:0000000004460995 The following specified operations cannot be performed under the non initialized condition. • Auto-up operation • Anti-pinch function • Key cylinder switch power window function • Automatic window adjusting function INITIALIZATION PROCEDURE 1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or more. 2. Door switch is OFF (close). 3. Turn ignition switch ON. 4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open.) 5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position, keep pulling the switch for 3 seconds or more. 6. Initializing procedure is completed.

Hi Noticed this week that my passenger window is not returning when closing the door. 99% of the time, it's just me in the car so very rarely is the door opened. No probs I thought, just do the reset - done a few times on my last 370z and the 350z before. This time, damned if I can get it to work. Tried the fully up, fully down, hold 3s, fully up (as per the manual) Tried the fully up, hold 15s, fully down, hold 15s, fully up ...and various others I've found with Google (all with ignition ON rather than engine running) The procedures definitely do something - sometimes the window stays up when opening the door (ouch), other times stay down and I have to hold the button to close. Before I resort to getting the car booked in... any suggestions ? 2018 GT Auto thanks

https://tiresize.com/tyre-size-calculator/ handy calculator, use the comparison option to show speed difference

Originally posted previously. On 3 occasions now I've started the car (2018 GT Auto) and the aircon/fan/heater controls do not respond. No buttons work and no on lights. The actual aircon itself works fine, just from whatever setting it was on when the car was stopped last. Did it to me yesterday when it was bl**dy hot - not a very pleasant drive home. Switching off and locking and then unlocking does not work but if you switch off, lock and leave the car for 10mins or so all is fine when you next start. Anybody else had the same?

I'm happy with the fact that, for me, my car feels more responsive with snappier gear changes in Auto Dyno reading 344 vs 334 vs 400 is immaterial And for the sake of a few hundred quid its got rid of the bloody annoying engine warning light

Probably easiest option is an OBD cable like https://www.amazon.co.uk/dp/B074M4XMBX/ref=cm_sw_em_r_mt_dp_U_-Eq-Cb3VCP987

Go for it! It's hard to quantify it but to me it does "feel" better - quicker pickup when overtaking on motorway and I swear the gear change (Auto car) is quicker. When I'm commuting to/from work mostly using motorway I do get a few extra mpg if I'm not too "enthusiastic" with the right foot. And best of all, the warning light due to Cat Efficiency doesnt need resetting every few day :-)

Been on the 'To Do' list for a while. Finally got around to removing the 370z badge this morning. Was expecting some ghosting but pleasantly surprised. Much better - in my personal view!

25mm ordered for the front :-)