14N

Not sure if these would fit: http://www.350z-uk.com/topic/81722-updated-carbon-canards-boot-divider-and-more/

Hello and

Ahh, but I'm not modding the Clio, I'm merely 'enhancing' it Well, that's how I'm justifying it anyway

Well, the car is booked into a friendly garage I recently found and I've asked them to get it up on the ramps and give it a check over. Basically MOT it without MOTing it. Essentially I've asked them to look at things like ball joints, bearings, bushes etc. They'll hopefully fit the tyres and exhaust while they've got it.

OK, I've bought a few presents for my daily driver Clio. The handling is a tad frigtening. I'm not sure if it's the twitchy go-kart like handling characteristics of the car and the fact that I'm just used to the Zed, but it doesn't like going round corners in quite the manner I'd expect. There are a decent pair of Falkens on the rear, but there is a mismatched pair of tyres on the front. And, not only are they mis-matched, they're a mis-matched pair of budget tyres! So, I bought these off eBay. A pair of Toyo T1R's with 7mm of tread for £76 +p&p I'm hoping they'll help the scary cornering. And whilst I was on the bay, I bought this too. A Powerflow cat back exhaust for £95. Should hopefully make the car sound a bit less asthmatic Pics and review to follow on both once fitted.

Woohoo - First post in the 370Z Parts For Sale section! (And I haven't even got a '70). Hi All, I currently have one set of 370Z carbon bonnet dampers and I'm looking for a willing volunteer to help me trial them before I place an order for any more. Ideally I need a volunteer that's handy with a set of spanners and a camera. I am offering the dampers at a reduced price as I'm asking that whoever buys them provides feedback on the fitting and also please produces a fitting guide, with pics to help other members that might buy them, should I order any more (subject to positive feedback). A guide like cs2000's for the 350Z dampers would be perfect: http://www.350z-uk.com/topic/72194-how-to-fit-circuit-sports-bonnet-dampers/page__hl__%2Bbonnet+%2Bdampers So, here's a pic of the dampers and the hardware that's included. And here's a couple of pics of the instructions that are included. I think, looking at the instructions, that a small amount of trimming maybe required to a part of the plastic cover near the brake and battery covers, but unfortunately I do not have access to a 370Z to confirm this. Apart from this possible modification, they do look as simple to fit as the 350Z ones. The (reduced) cost of this first set is £70 delivered.

Wheeler Dealers started last week with mk1 XR2. I'd almost forgotten how much I hated Brewer!

You can also get full episodes of the new series on YouTube now

Hello and

I liked Lizard Lick, but stopped watching it as it got far 'too' staged.

^^^ ^^^

http://www.350z-uk.com/topic/63671-cleaning-screen-washer-jets/page__hl__+return%20+valve#entry943996

Try replacing the non return valve. Costs about £2 and is a common cause of washer jet issues. It's found tucked up under the brake fluid cover just below the windscreen.

Which one did you get mate? They appear to be £40 on the amazon link above. Just trying to figure out which t-shirt to get. At least it'll save me being Bennett's beer assistant.

+1 What an opener!!! Well done to all the Brits. I know Bradders didn't get the result he was after, but should be proud of this weekends achievements. Great race

They do also offer covers for the rear seats though. I haven't found many companies that offer this, So it looks like they know their stuff.....

Bostin

Have a great day mate.

Hello and

Hello Jonny Whereabouts in the West Mids are you?

Thinking of you and yours mate. Best wishes.

Needs a BGW

Epic high side from Bradley in FP3 yesterday Lucky the bike didn't hit him as it somersaulted into a million pieces. Fair play to him getting straight back on the spare tho. Best he's aching today.

Maybe get some of the engine bay parts/covers hydro dipped to go with the hoses

Fixed that for you Hello and