Gizmo-R

Ground wire ideally should be short as possible. You should find a bolt somewhere in the centre console that is linked/ground to the chassis so you can just attach it to that!

Thats pretty badass! Is it lowered? Looks like they fill the arches much more than normal set of 20" do!

My thoughts were the same!

I have a pair (2) of the above?? Are you looking to put them on the Zed?

Welcome to the forum!! Your car sounds very familiar Would it be this one by any chance?? Your spec seems to fit the bill http://users.autoexposure.co.uk/vehicle ... orthampton

This is what you need! viewtopic.php?f=35&t=30870

Maybe try a window reset? I did this with mine when mine had a problem with winding itself halfway back down and fixed it with window reset Do a search or look in guides for this

I dare say you are better off getting a new alarm. IF you pay an auto elecrtician to look for the problem it could run into the region of buying a decent alarm fitted I dare say

Very nice!

Do you know where the secret compartment is then??

Is it just me that finds it amusing the the JVC is proudly showing "HEAD MODE" in the upper left corner? Good job on the LEDs tho I did find it quite unusual for it to say that but the beauty is that it is mere a USB port it provides so you can plug a USB stick into it with mp3 or videos and watch it off that! Or just plug in the ipod with any old ipod cable so it means you dont need to buy any additional cables to use an ipod

Pretty Straightforward, link the park brake wire to ground and you will be fine PM me if you get stuck!

IT Training? What kind of IT training do you deliver?

Certainly Sir!! http://my350z.com/forum/exterior-and-interior/429871-interior-led-conversion.html http://my350z.com/forum/exterior-and-interior/166631-blue-led-interior-conversion-finished.html You do need some soldering skills but a decent soldering iron aand a thin tip goes a long way to making the job easier Work on the windows switches first for practise if you need a taster as these are the eaisest to do!

I found some T20 amber LEDs on fleabay for little money and they work a treat! Only issue is that that housing is way too big to fit through the hole! But I have a pic for you guys anyway:

After messing about with LEDs for gauges and now resetting them to the correct readings I ended up doing this! Its a JVC AVX830! Awesome unit and Ipod routed to the center cubby. Also finished off LEDing the AC controls too Tried to get the gear know off too but that was uber impossible! Need to re-intervene that one another time

Tar remover will shift it. I think AG do Intensive tar remover

The ride to work scheme is really good. You basically save around 40% RRP off bike I was only limited to halfords at work so I got a ltd edition Boardman hybrid bike! Awesome bit of kit! Its a 18 month agreement for me and I did question about buying the bike off work (as it is a company asset) and they said most you will pay is £20 at then end of it. So suited me fine!

Parked in our visitor car park! Very nice!

Thanks. Will check this later on tonight! Cheers

Sure thing! Can the Oil guage reach the 120psi mark when you are giving it some beans? what have you done? what are you trying to do? I took apart the 3 guage clusters (to do LED mods which I decide not to in the end) and I reattached the needles when the car is running idle, stationary. The last time I looked at it from memory on idle the oil psi needle was just over the 60 mark so I am assuming this is correct. Seems fine but I cannot remember if when you put your foot down the needle can sometime creep near the 120 mark

Breathing restriction is akin to training in high altitudes. Within reason it is an excellent way of training your body to use oxygen! A little insane for me but I usually finish off a training session with five 3min sessions of grappling that is enough for me!

Sure thing! Can the Oil guage reach the 120psi mark when you are giving it some beans?

Top man! Thanks

Can someone tell me where the needle hovers round when your car is warmed up?? IIRC mine hovers around the 60 mark! Just need to check as I was eager to do some LED mods and i forgot to take a marker reading Cheers