Mark@Abbey m/s

James, yes we have a very good 4 wheel alignmnt system and we know the cars very well. We charge 1 hour for a 4 wheel alignment this comes to £117-50 inc vat , we have a good set up for a road car far better than Nissan's stock spec. Why dont we look at doing the whole thing you have spoke about on here , Plenum spacer/remap and carry out 4 wheel alignment. Give me a ring tomorrow on 01883 732331 ext 2 I am sure we can sort you a deal out. Mark

These car have problems with the connector under the seats, we normally change the connectors, sorts the problem. Mark

Andy, do you want the mirror I have held for you? Mark

I have a red one as well. Mark

Built in the US

thts cheap, the motor would cost more then that to build. front cross member (rad support) they used to be made by some one makes fitting larger rads far easier. nice car thou. hand full as a daily driver thou I think

Car will need remapping as soon as the items are fitted. I can do an excellent fitted Price including remapping stock ecu PM me a email addy I will do you a quote.

sorry.

Y pipe is the same for all 350/370Z,s. Mark

Ask to see a dyno graph , cause all the cars I have seen with exhaust dont give any increase until we tweak the maps. Mark

Whats this mean?

We will be able to supply Stillen Equipment direct from Stillen very soon. Sure we will be able to complete with people bringing in the stuff direct themselves and provide back up if you have any troubles. Mark

yes they sound awesome, thats why it is still fitted to my JDM.

The DC system just seems to cause a drop in midrange torque we have found ( I actually run one of these on my JDM car) I have cars with indentical mods as cars with DC systems on and they all give more mid range torque. The HKS super sound master isnt full true dual is connects to a stock Y pipe so you get the full scavenging effect from the connected headers, The copies thou we have found have inferior silencers causing bad flow, I think the pipework Diameter is smaller as well than the genuine HKS systems. I still think you cant be a set of de-cats ( resonated or not ) XYZ with race cat and a stock UK system and a remap, this sounds real nice without being raspy or loud. Mark

Presume you saying it has been mapped with the unichip set up that comes with the APS kit, a run on the dyno to check everything out will be £100-00 inc vat ( 1 hour on the dyno) But I know the car will be very very rich on boost.

Kev, will look into shipping dates and let you know Chris, your car will be very rich if your just running rear exhaust section and air intakes. If you remove the front cats ( 370,s have 2 sets of cats just like a 35GTR) most systems remove the rear cats , the car will run dangerously lean. But a fully decatted car gives real good power we have found with a good map

Your car will lose power/torque running one of these.

Chris, I said I WONT do a group buy on the Uprev reflash. With regards dealer uploading new software < I do have my finger on a pulse at Nissan , there has not been any upgrades on the 370Z,s yet. But the only way to definitely get around this is to unload the map prior to service but this is a pain. The bonnet light problem is being sorted; damn UK cars!!!!

I have just been asked to do a group buy with the Uprev reflashing I am afraid these are trimmed to the bone with regards any more disount we find no 2 cars are the same so you cant just upload 1 generic maps. We will give you a before and after dyno graph. Normall it take 2 + hours to map each car some cars take even longer but we still charhe the same price 393-50 inc vat, this also includes the Uprev License. Which if you change cars we can reflash your old car back to stock and you can take your licensce with you to have you new car reflashed done a few with cusomters upgrading to 370,s already. You cant lose your map by disconnecting the battery , but if the ECU was fried you would have to buy a new license but i do keep all the maps so you wont have to pay for a reflash. FI cars are different we charge £250-00 for the license + approx 5 hours dyno time to map so approx £500-00 dyno money. If you come back for some more dyno work I will only charge you for dyno time which is £100-00 inc vat. I have tuned 10+ FI cars and over 70 N/A cars so we have quite a lot of data for what works and what doesnt work. any questions fire away. Mark

I can do a good deal on HKS or Stillen. HKS have no stock at the moment thou. The Janspeed is noisy where as the HKS/Stillen sound awesome. Had a 370Z on the dyno yesterday with resonated de-cats and Berks system and Stillen long tube filters, what a lovley sound and lots of ponies....

Stoptech 2 piece rotors are very good and cheaper than PFC rotor set up. I wil get some prices you lot for Stoptech stuff on here tomorrow , should be able to sort a good deal.

depends what you want from your car doesnt it, with regards trim and light etc etc. The HR motor is a gem of a unit awesome when tuned. everyone has there own ideas with costs etc etc but it make an awesome car when done, my JDM car will be like this when it is finished as a track car.

have you driven a tuned 313 bhp car thse totally blow the early models away with torque/bhp and revs. the conversion just bolts together no major work at all. nice n easy. Not a sif it is a engine from another car , you can even change the log book to the new CC. funny how people with comment with out actually having knowledge on these type of jobs.

have you started the car with the MAF disconnected this will cause both those CEL,s , disconnect the battery for a couple of minutes this should cure this problem ( make usre you do reconnect the MAF 1st thou)

your need the following Engine and gearbox ( inc air flow meters/air boxes cats to go with car) Engine loom and Ecu Dash ( clocks) as the rev limit is much higher for the 313bhp cars and a bonnet If you have a 276bhp car and buy the stuff the right way it is cheaper than trading the car. Mark