Neilp

For the k1 I'm sure they are just standard 3" gaskets with 2 bolt holes. You may wanna double check just to be sure!

GM spotted at 19.10 @ the shell garage! Sounding good

I'm sure in fast and the furious don says we should be double clutching aswell Sorry Anders I could resist. I know what you mean about the blip I do it on the track sometimes by mistake just catching the revs a little higher than they should be. I come onto the throttle a little early when kecking myself seeing the man they call alex shooting up my back end

I use the nismo veruspeed filter. But the oem filter(White one) is good enough I've been hearing.

I run a nismo y-pipe which has 3" outlet going into the scorpion. It sounds awesome to be honest. Nothing too loud but very nice tone. Especially now the exhaust is getting "choked" by carbon

Google is ur friend, elephant, admiral, bell, Adrian flux, there's loads and loads. I would advise not use use comparison websites, my cheapest was something like 5k went direct and got quote 1k.

Have you any results on the scorpion exhaust on the dyno? Just wondering since it only has a 2.5" bore centre section.

There's quite a few down this direction now.

ok

Nonsense how is it nonsense? im pretty sure a rim has a related/recommended tyre size which will fit safely, and then there will be a limit either smaller and larger becoming more and more stretched or hanging over the rim, where to a point they become unsafe or less safe? not 100% true as the oems are 8's all round its just not optimal My oem wheels are 8.0 and 8.5. my nismo 19's are 8.5 and 9.5

What mileage did you do in those months. I'm lucky to use a litre a year topping up on an 06 300ps engine

The actual wheels should be a staggered size, ie 8.5" on front 9.5" on rears. There's no point in buying wheels and then trying to stagger the tyre size as it won't work or may be dangerous.

Listen to the man, he knows what he's talking about!

The rear wheels should be a staggered size ie wider. On 19" 245 Tyres should be 35profile. The pro's will be along soon to tell you correctly

Just checked the man with the zed on his chests subforum. They are 595 a pair now. But oh how very sexy!

Ah I thought it was 550 a side! Is that the pair vik?

About a grand. Don't buy ebc turbogrooved, everyone that I know up here that has them complains about the noise and aren't impressed by them. The oem brembo discs are good enough.

Performance friction discs. Goodridge lines or hel lines. Motul rbf660 fluid

defo polly! she drives as slow as vik by the sounds of it

Hey mate, I run 30's and the ride is great and very stable. I've dropped u a pm with some info. I have the nismo skirts and bumpers/splinter and I can get over most speed bumps without hassle. Had minor issues with huge ones but suprised myself with how big I can get over

+1

Ah no worries I was on it earlier and sayin i wasnt authorised and then it disappeared. Thought I'd done something i shouldn't have

What happened to the iPhone jailbreak thread?

I dnt know why people stretch there Tyres. All it does is make the car handle terrible. Taddy the correct size for a 8.5 rim is 245/35/19. Even the standard 18x8.5 comes with a 245

I have 245/35/19 and 275/35/19. That's what nismo spec'd for the nismo rims I'm sure. I may stand corrected though. You will be stretching the tyre and also could have some tcs issues. Why are you wanting to go thinner? The oem wheel is 8.5 on rear and has a 245. So in reality your talking about putting oem front tyre widths on a 19" rim which is wider. Gonna look like skinny bike wheels.