BulletMagnet

Just like people misusing "bought" and "brought"

Short answer = no Long answer = maybe, if you can do bodywork and transfer the facelift section of the bumper over onto a pre-facelift or even fabricate/modify the mounting points of a pre-facelift to accept a set of facelift reflectors

Then you'll be looking for a 350GT instead of a 350Z (no back seats)

So am I Stevo, but cop a load of this. I order my Invidia Exhaust with Tarmac, He orders with Invidia in Los Angeles, California, fast forward 40 hours, DHL is dropping my exhaust off at my doorstep. So virtually just a shade over 48 hours from ordering to fitted on the car. Tarmac also worked the same magic for my bro when he ordered a set of Hotchkis Sway Bars from the US. So I don't think it's gonna take as long as you think it will

Chris, you are deffo getting the hang of this

Unless VIS are doing a cheap copy of the Vertex full bumper... It's amazing what 5mins on Google Search can yield

unless it's the VIS full rear bumper

Closest I could find was this, and it is deffo smoothed in on the video

Thanks, still a total n00b at photograpy tho

They do come in a variety of finishes, all of which Tarmac can get his hands on

Post pics of current and newly purchased units. I'm sure then peeps will get a better idea and can advise on what to do

Blue centres with polished lip don't look that bad Mind you, does needs a decent lip, which the Rays don't have

I used to use Rimwax, but it seems to perish way sooner than the Poorboys stuff. Also the countless homosexual innuendos put me off using it in the end

Polished lips and azure centres

I use Poorboys Wheel Sealant and it's good stuff. Usually apply first coat and leave for about 20mins before buffing off and the apply a second coat. You will notice that the surface has already become a bit slippery after the first coat. Again leave for about 15mins before buffing off. Usually use a foam applicator to apy and a microfibre to buff off. Plus Poorboys smells nice

When you sell something bearing a premium brand name, then you would expect premium gear. Would you be disappointed to open say a set of Bowers & Wilkins speakers to find they had papercones?

Well obviously not selling mine, hence smiley

Would have been nice if the Bose was actually a Bose, i.e. the speakers not being papercones etc.

There should be a remote amp power wire, usually blue or blue with a white line. This will be seperate from any antenna power wire

I'll sell you my freshly refurbed Volks.........£5K

Spotted heading westbound near Ipswich @ 9:45 this morning, got a wave too

They better start inventing Securefoam as seen in Demolition Man then

Keyser needs to build a Zotel next to accomotade the future queues

I put my GPS receiver for my Pioneer in the centre console under the triple gauges, have yet to experience signal loss

Having had a K1, a K2........I wouldn't........and that's all...especially for that kind of money