R35LEE

to the forum!

Nice clean looking Z!

I have 2 rear rims with new Bridgestone 050's on in the garage. PM if interested

Best of luck with the sale!

You guys will be the coolest kids in McDonalds car park Good work!

Done 350sx!

Matt, I have a 4,000 mile gearbox for your car if needed. The gearbox being notchy is not too much of an issue but if you have to force the gears then its synchros are on their way out. Can you explain the knock your talking about?

Glad your ok mate! Feel for you about the car but at least it protected you!

If you still have issues I have a load of these seatbelt pre-tensioners.

A lot of this depends on the kit / products used. Im going to let Peter have a go at a set of alazan 350z seats when he comes up here!

Looks great Biscuit!! Just needs a hard pipe kit for the induction and some subtle silicone hoses

Or if you want it fixing I have a good 07-09 CD changer I could fit to your bose along with mp3 tape deck hack. PM sent Can even do it while you wait.

Ye, I would go with Wasso here! Get an Ultima as it will out drive nearly everything on the road or track. Engines are cheap enough from America Racing for big pushrod power that never fails!

Guys I have a pile of horns in the garage. Just let me know if you need the high or the low ones

Have one at present but its reserved for a guy who wants a full trim. Pm sent to your inbox!

2 words Matt and second word is off! Can fit the New fan to your car though.

Ye I have the slam panel the rad sits in! One ashtray left but on hold for a guy buying a full trim. Dr Evil, you already know the score with the discs.

Still got this guys, anyone interested before I eBay it? Ideal if someone is going a forged lump!

Not bad!

Hi guys, these must be sold before xmas otherwise Matt Bowey wants them for his green machine! Will have another set modded for the new year

Really easy to remove mate! remove centre trim as if you are pulling the stereo out (guides are on here). Then remove cubby with 4 philips crews, then take 2 hinge screws out (again philips) and watch you don't lose the springs. Then remove the small screws on the back of the cubby door and it exposes the button and catch mechanism. REMOVE, PAINT AND REPLACE! Easy

I removed mine and painted it matt black. Make sure you get all of the rubberised layer off the button, prep the surface and degrease

Happy Birthday Mate!

I'm asking one of my customers today for you Lexx. Fingers crossed

Great project mate!