Chesterfield

Ahh but then these type of threads just wouldn't get the attention, which is what life is all about.

Can we draw a line under this now. I think its been done to death hasnt it.

Its pure ASW gold.

Isn't this the entire point of this threads very existence summed up?

Blody ell its massive if thats a CD on the top end of it. Do you type by walking on it?

I would advise being very careful with Accident Exchange hire agreements, they do appear to be a bone of contention with some insurers, as documented in various locations on the net. There are also stories of one customer being landed with a £30k bill themselves because the other parties insurer refused to accept the costs for hire at those rates.. Check the small print twice and be careful.

If the paint is anything like the ultra yellow paint on a Zed, then matching it will prove to be a pain in the backside. Be prepared to be without it for a while longer if they have any issues matching it.

Concur - office 2003 is what we use in the office, 2007 is just over bloated and restyled in the cartoon like feel of win xp for no particular reason. Liam, just a word of caution, if you are planning on using any software that is not quite legit for business use, you may want to check out the fines and restrictions that can be imposed on a business found to be using such software, and consider whether its worse the risk. If you buy a cheap hard drive, you can buy the oem version. The oem version of office 2007 is about £145 ex vat. Whereas the full retail package is nearer £300. Either way, the fines that could be imposed if a business were found to be using dodgy software would far outweigh the cost of the software itself.

The usual bose left speaker problem with the Z is supposed to be a fulty pickup of the laser on the CD head unit. If its happening on radio and on CD then it may point to faulty connection rather than the usual bose problem.

Gorgeous cars, they are certainly not old mans cars the vantage. They exude class while still being a brash sports car.

It depends on how much you think it will cost to replace the TV if something goes horribly wrong after a year. Extended warranties (and even manufacturers warranty) will probably not cover dropped/dead pixels on an LCD either. Remember also that contrast ratios quoted on LCD screens are more often than not "dynamic". This contrast ratio is NOT to be compared with Plasma contrast ratios, as they are calculated in a different way. Dynamic ratios are calculated by measuring the darkest black when the LCD backlight is on low, and the brightest white when the LCD backlight is on high. LCDs acheive an artificially high contrast ratio by varying the intensity of the backlight to acheive the variation. This can cause issues when a picture has both dark and light areas, as the screen has to decide which level to set the backlight at in order to acheive the best. you can read more about how this works here: http://en.wikipedia.org/wiki/Contrast_ratio There is no specific formula on how to compare a static to dynamic ratio, as it depends on how much the light can be varied on the LCD backlight. With newer LCD's its the variation of the backlight that increases the contrast considerably - I would divide the modern LCDs ratio by 5 or so to get the true static contrast ratio that can be compared to a plasma.

I dont care what anyone says, and whatever the car is, two blokes in a convertible does NOT scream hetrosexual. Even a Lambo convertible suffers from that sadly. Although I think the convertible Gallardo is nice, I would stick with the coupe for that reason.

I can put on an accent.

Do your parents want to adopt a house trained 29 year old northerner?

Nah, if he sets the resolution high on that 24" screen, there will be more room to type before scrolling starts.... They will just get longer. Nice computer. Ive never been tempted by a Mac but I am impressed from what Ive seen, they seem to just fly compared to PC's held back by Microsofts operating systems. Cant wait until Monday myself either as hopefully the car will be back from the bodyshop . It appears they are being perfectionists in matching the colour (which from the 20+ test cards they have done already, doesnt appear to be easy).

Well done Liam, Im sure it will be a day remembered for a long time.. Would you like it resetting to zero now so you can do it all over again?

I think some kits look nice without a rear spoiler, but some dont. That one above has the standard lip spoiler at the back by the looks of it. I think without anything it looks unfinished. When I finally get mine back Ill be able to make an in the flesh decision of whether it needs an extra spoiler on the back. I do think the Nismo can look a bit OTT in some cases - its the big fat block at the bottom of it that makes me think that. Ive seen some installations where the bottom section of the spoiler has been cut off which looks nice, but it does lose a lot of the strength that way and I wouldnt be confident of shutting the boot with the spoiler if that was the case.

Ill still ask for it again you know when I get round to ordering.

Thats the one from spoilerdepot I think. Will fit over the top of the existing spoiler without problems. I wanted to have one fitted at the same time as the rest of my kit, but I hadn't placed an order before a little bump presented me with the perfect timing to have the kit fitted at the same time as a new bumper. Will certainly be adding one of these to the car if it doesnt look quite right when I get it back from the bodyshop (this week hopefully, they've had it a month!)

Gorgeous wheels I think, but with Christmas coming up and the missus planning on taking an empty suitcase with us to Vegas for new year, I have a funny feeling spending £2k on wheels right now wouldnt go down too well. Cracking deal though I reckon.

Not a problem Tim - they are driving me nuts in the garage, and just want rid - you have PM.

I think for central location, (and probably make it a little further south as the last social gathering was Manchester/North Wales) then Birmingham would be suitable. So, date is Saturday 15th December Location Birmingham (hotel suggestion Liam?) Attendees: 1) Sarnie 2) Chesterfield

Ive got a set of four, one with slight scuff near one of the wheel nut wells, and only two have tyres, one rear and one front. (but they are nearly new tyres) Collection only, £150 ono, someone take them away please.

They both screw and hang on the wall (at the same time). They hang on two screws and then have four pints of anchor with very long screws to the wall. The botom steel section at the front folds down to reveal the controls. There is no taking these on and off the wall, and I wouldnt have thought mounting in front of plug sockets was advised, or indeed legal from a safety point of view.

Actually I did. (anyone thats visited our house knows Im a DIY nut) Regulations state that installations must be carried out by a competent person. If you are a competent DIY person then it is possible to do the job yourself. I had to remove an old flue fire and brick up the internal and external walls too. There are things to consider before you do the work yourself though. Primarily is that your insurance could be affected if a gas appliance is not installed by a CORGI registered fitter or has the appropriate checks carried out after installation. I had mine checked when a Corgi fitter came round to do some other work in our house. You cannot install a gas device for anyone other than yourself if you are not CORGI registered, so you cant have a competent DIYer install it for you, nor can you install one for someone else. I was lucky in that the pipe leading to the existing fire was long enough to connect to the new one, and the isolator valve for the fire did not require relocation - if this wouldn't be the case for yourself and you needed pipe extensions or valve relocations, getting a CORGI fitter in would probably be prefferable (even though they dont come cheap). Not that you couldnt do the work, but better safe than sorry I suppose. Just to correct myself, you can actually put things above these types of fire, like Jonathan has, but you need a fair gap, and/or some sort of heat sheild on the shelf, which Jonathan has.