jimmy.farrow7 Posted June 25, 2015 Posted June 25, 2015 I brought a new Zunsport Grill from a member but it didnt come with any instructions. Could anyone tell me how to correctly fit or how you have fitted yours. Quote
jimmy.farrow7 Posted June 25, 2015 Author Posted June 25, 2015 Yes mate thats all, i imagine they go through the back but where too Quote
Stutopia Posted June 25, 2015 Posted June 25, 2015 When I did mine there was a bit of plastic, a few inches back, running in parallel to the grill / perpendicular to the ground. They just self tapped straight into it. It did require me stuffing my other arm down behind the bumper and holding the plastic bit it in place while I screwed it with the other. Quote
ZEUS Posted June 25, 2015 Posted June 25, 2015 ^^^Exactly what I did , nice one Stu you saved me writing all that! 1 Quote
jimmy.farrow7 Posted June 25, 2015 Author Posted June 25, 2015 So the original grill stays in place then and this goes over the top. Ill have a check tomorrow Quote
jimmy.farrow7 Posted June 25, 2015 Author Posted June 25, 2015 And just screwed straight through the grill into the plastic i take it 1 Quote
Mike k-g Posted June 25, 2015 Posted June 25, 2015 have a look at the screws ..think there's 2 sizes in lenth. mine was. Mike K-g Quote
Humpy Posted June 25, 2015 Posted June 25, 2015 And just screwed straight through the grill into the plastic i take it Correct mundo just self tappers into that plastic. Quote
jimmy.farrow7 Posted June 25, 2015 Author Posted June 25, 2015 Yeah there are two different sizes so i will have a better look tomorrow and give you an update Quote
GMballistic Posted June 25, 2015 Posted June 25, 2015 Make sure you drill pilot holes first as it makes the job a lot easier. I fixed with screws in the centre but didn't bother fixing with the screws on the ends as cable ties did the job just as well (plus you'd never notice). Quote
Stutopia Posted June 25, 2015 Posted June 25, 2015 Make sure you drill pilot holes first as it makes the job a lot easier. I fixed with screws in the centre but didn't bother fixing with the screws on the ends as cable ties did the job just as well (plus you'd never notice). I wish I'd drilled pilot holes. 1 Quote
Lyndzzz Posted June 25, 2015 Posted June 25, 2015 Make sure you drill pilot holes first as it makes the job a lot easier. I fixed with screws in the centre but didn't bother fixing with the screws on the ends as cable ties did the job just as well (plus you'd never notice). I wish I'd drilled pilot holes. So do and had the zip tie epiphany too!!! Bit of a PITA to fit but looks great once done Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.