Bodyboarder81 Posted October 29, 2014 Share Posted October 29, 2014 That's lovely !!!! Those brakes look massive , love it if you ever came to Portugal i will tell you the best spots in Europe to surf. i´m a BB too. Cool man cheers Went to Portugal a few years ago and got some great surf . Off to mauritius soon to get some waves in hot water ! Quote Link to comment Share on other sites More sharing options...
alexdax Posted October 29, 2014 Author Share Posted October 29, 2014 (edited) Loving the GTR brakes, much hassle to fit? custom brackets? Yeah I noticed the cosworth head gaskets but there are quite a few nissan oem ones that need replaced when doing a full strip/build, What do you plan on reving to?(what are the BC springs rated for). Didn't know cosworth did 10.3 comp pistons, good choice and as you say the meth should help avoid knock with lower intemp. yes i made some costum brakets this is not the one that i made, i guess i never taken a photo of it, but is just like it except for the machine work and ALOT of time i guess it came ok the gaskets wil be oem Nissam the sprigs are in just for a safe 8k rpm. i guess its ok until 8500 rpm but this is a street car and i will do 8k unly a couple of times... i guess. Edited October 29, 2014 by alexdax 1 Quote Link to comment Share on other sites More sharing options...
alexdax Posted October 29, 2014 Author Share Posted October 29, 2014 big ? 1 Quote Link to comment Share on other sites More sharing options...
nissanman312 Posted October 29, 2014 Share Posted October 29, 2014 I so wish I was good with the spanners and had the knowledge to do this sort of stuff looks awesome Quote Link to comment Share on other sites More sharing options...
evilscorp Posted October 29, 2014 Share Posted October 29, 2014 Hubs match up ok? Or did you make spacers for them to fit on? Quote Link to comment Share on other sites More sharing options...
alexdax Posted October 29, 2014 Author Share Posted October 29, 2014 Hubs match up ok? Or did you make spacers for them to fit on? nop... no need to mess arund with the hub, the braket use unly the oem studs holes. 2 holes for the oem studs and 3 new ones for the r35 calipers Quote Link to comment Share on other sites More sharing options...
GMballistic Posted October 29, 2014 Share Posted October 29, 2014 Great work Alex, ...following with interest and really love those big brakes. Quote Link to comment Share on other sites More sharing options...
PPod Posted October 29, 2014 Share Posted October 29, 2014 Loving the wheels on this bad boy Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 3, 2014 Author Share Posted November 3, 2014 new photo update. i know you all like photos... starting at 8:30 AM 10:30 am starting to remove it job done Engine without some parts Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 3, 2014 Author Share Posted November 3, 2014 todays work preparing the engine to go to the machine especialist Quote Link to comment Share on other sites More sharing options...
ZEUS Posted November 3, 2014 Share Posted November 3, 2014 Nice work, nice pictures Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 3, 2014 Author Share Posted November 3, 2014 (edited) removing the head what about compression fail?? any guess? I guess that´s it? and this one??? what you think it is? any guess? Nice and clean All desasembled ready to go to the machine mam... Edited November 3, 2014 by alexdax 1 Quote Link to comment Share on other sites More sharing options...
Lincolnbaggie Posted November 3, 2014 Share Posted November 3, 2014 Great pictures Alex. Where in Portugal are you by the way? Quote Link to comment Share on other sites More sharing options...
R35LEE Posted November 3, 2014 Share Posted November 3, 2014 Great project Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 3, 2014 Author Share Posted November 3, 2014 Great pictures Alex. Where in Portugal are you by the way? Lisbon / Sintra Quote Link to comment Share on other sites More sharing options...
Lincolnbaggie Posted November 5, 2014 Share Posted November 5, 2014 Great pictures Alex. Where in Portugal are you by the way? Lisbon / Sintra Shame you're not closer to the Algarve, I could have given you a hand. Quote Link to comment Share on other sites More sharing options...
Lincolnbaggie Posted November 5, 2014 Share Posted November 5, 2014 Only ever seen two 350s over here; one was mine and the other was on UK plates so I'm guessing a tourist. Are there any others around you at all? Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 5, 2014 Author Share Posted November 5, 2014 (edited) Only ever seen two 350s over here; one was mine and the other was on UK plates so I'm guessing a tourist. Are there any others around you at all? give me a call if you ever came to Lisbon, i have alot of projects in hands, A kit car, a track day 106 an AE86 turbo ... (if your a petrolhead off course) and i only have seen 1 350z and a 370Z portuguese they are rare around here Edited November 5, 2014 by alexdax Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 5, 2014 Author Share Posted November 5, 2014 this waiting for the machine shop is killing me. while im waiting i started to paint some parts Man... was all of this inside my engine? I ordered a rebuild of the OEM nissam clutch disk with organic ferodo. some of my friends cars uses this material with the OEM parts. The advantege is that the clucht feels like OEM but it can thake ALOT more Torque Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 5, 2014 Author Share Posted November 5, 2014 oem stuff Quote Link to comment Share on other sites More sharing options...
GMballistic Posted November 5, 2014 Share Posted November 5, 2014 Great progress Alex ~ scary to watch the engine being torn out from the Zed but all for a good cause. Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 20, 2014 Author Share Posted November 20, 2014 working in progress... Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 20, 2014 Author Share Posted November 20, 2014 Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 20, 2014 Author Share Posted November 20, 2014 Quote Link to comment Share on other sites More sharing options...
alexdax Posted November 20, 2014 Author Share Posted November 20, 2014 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.