Jump to content

Scott's Project Zed


Scott TMN

Recommended Posts

On their machine they put in the reg etc and that brings up the setting paremeters etc, the only input they then have is a choice between 17 and 18" wheels, i did query that and they said the 19's wouldnt make a difference so I would say a generic printout..

 

to answer your earlier question btw GMballistic, the 19" drive fantastic. :)

Link to comment
Share on other sites

On their machine they put in the reg etc and that brings up the setting paremeters etc, the only input they then have is a choice between 17 and 18" wheels, i did query that and they said the 19's wouldnt make a difference so I would say a generic printout..

 

to answer your earlier question btw GMballistic, the 19" drive fantastic. :)

Stop it you're really tempting me now, :surrender::lol: ...and they look soooo good too. B):dry:

  • Like 1
Link to comment
Share on other sites

Cars looking good mate, iv dropped my zed with them springs as well and am after a front splitter and just want to no dose yours catch on speed bumps with it on ? Ps love the v2 bumper were did you get it from?

Tapatalk

Cheers :) my lip already had quite a few scuffs on the underneath even before lowering, but I don't thinks it's from humps (I think it's from slopes) surprisingly since lowered I Havnt scraped the bumper on a single hump, I have only scraped twice now overall, and that was the underside opposed to the bumper, and even then I think had I approached it better I wouldn't of scraped atall. In short I Havnt had any issues :)

 

And I was lucky enough to snap it up on here, it's an shine auto one so has some flex :)

 

Car looks awesome man

B)

 

Cheers guys :)

Link to comment
Share on other sites

Wanted to ask you Scott if you get 5 mins one day could you take a picture from low down directly behind your Zed?.

 

Just very interested to see the rear stance on it with the wider rear tyre set up. Thanks. :thumbs:

 

A quick one on my drive for you mate, it is sitting a bit higher than usual due to my wonkey drive, but close enough :)

84D66BA8-AC77-4DEB-B7FA-3726F4AD10CD-351-0000001EB19A7815_zps6bb751e6.jpg

  • Like 1
Link to comment
Share on other sites

So this weekend saw some previous little touches being re-instated. And i just remembered its been exactly a year since i got the zed, havnt lost any love for it whatsover... if anything i love it even more! :D

 

Recently i noticed a small 'dent'? on my front arch, looks like it came from inside and it has resulted in some paint loss, so a combination of this needing seeing to and my front bumper needing some bodyshop work, I have decided against the wrapping. For the time being at least. So after peeling the wrap of the bonnet and bumper, the eyelids finally made a return, along with another Nismo sticker i made up Friday night :)

 

Wrap about to come off

444868BF-8D1B-4AE0-B1DE-535D23C53C8E-351-0000001DBB0DF6C4_zps431a5d7f.jpg

 

And eyelids ans sticker re applied

34DA8391-6141-4170-82B7-0501D96F1033-351-0000001CDC0E7D98_zpscd6b9439.jpg

 

C1ED22D3-0A24-4FD1-BA62-8588E9CBA08D-351-0000001E64E6B7FF_zps571c1492.jpg

Edited by Scott_f91
  • Like 1
Link to comment
Share on other sites

Wanted to ask you Scott if you get 5 mins one day could you take a picture from low down directly behind your Zed?.

 

Just very interested to see the rear stance on it with the wider rear tyre set up. Thanks. :thumbs:

 

A quick one on my drive for you mate, it is sitting a bit higher than usual due to my wonkey drive, but close enough :)

84D66BA8-AC77-4DEB-B7FA-3726F4AD10CD-351-0000001EB19A7815_zps6bb751e6.jpg

 

That's great Scott thanks but any chance of doing one like the below picture?

IMG_0360.jpg

 

Talking with Mitz @CS now about alloy/tyre combos thanks to you. :angry::lol:;)

Link to comment
Share on other sites

I did try to get one like that, but with the wonkey drive and the sunlight not working in my favour it came out too dark :/ ill try again in the week hopefully for you :)

 

and sorry :surrender: you wont regret it though, what you swaying towards?

Link to comment
Share on other sites

I did try to get one like that, but with the wonkey drive and the sunlight not working in my favour it came out too dark :/ ill try again in the week hopefully for you :)

 

and sorry :surrender:you wont regret it though, what you swaying towards?

Just thought I'd copy you. :p:lol: Except I like the Steel Grey coloured Rotas. B)

 

It's not definite yet though anyway but I'm in discussions. :ninja:

Link to comment
Share on other sites

  • 3 weeks later...

So my side situation has finally been sorted. Had enough of the nismo style skirts and then the group buy popped up for Tarmacs side steps, I thought why not!

 

Arrived safely (thanks tarmac :) ) and honey checking out the latest buy.

58542A64-1E8E-4E56-961D-7E13571CB3B4-1981-00000123C08FF704_zps217aa7af.jpg

 

I wanted them colour coded, reason being i think they can sometimes get a bit lost being black. So I dropped the car off to the bodyshop to get them painted, as well as a bumper respray to properly smooth over and paint the holes left from the number plate and other bits of correction on the bumper.

nice clean bumper, very happy :)

49B868D2-A2F7-4F0B-84C4-4E74E1CB9EAC-1981-0000012660494750_zps490698d8.jpg

 

And then I set about marking up and drilling my steps :)

FCED5A35-2C8C-4240-AE71-0EC265C278BF-1981-000001243DF70CC1_zpsfc9b3315.jpg

 

And fitted

4804320B-9338-49C0-B64A-E7CFCBDDC958-2078-0000012AB9C4D269_zps1794eb35.jpg

 

Then jak insisted on giving it a polish, a good job he done too, thankyou jak :)

EC28310E-7B48-4E58-AB9F-BD7C122C9CDF-2078-0000012CE0146D2C_zps60dbad1a.jpg

 

Jaks victory pose and a crafty flex

5477F252-50B1-4210-A50B-9E8B627C6AB4-2078-0000012CE9F35E82_zpsd9f3e35b.jpg

 

And some final fitted/cleaned photos :)

EBD063A7-194F-4F4D-A5AA-35026ACEA29C-2078-0000012DCE372B79_zps573e846e.jpg

 

72B885F2-8407-4C6F-AC27-43A17CF6739B-2078-0000012DC5ED3935_zps1b527c6f.jpg

 

A364E968-B551-42F2-BDAB-B2A8FF3C21DA-2078-0000012DD4C61E6A_zps7bc1e81c.jpg

 

thanks for looking :)

Edited by Scott_f91
  • Like 2
Link to comment
Share on other sites

Thanks guys! :)

 

and billy next up i think im gonna try my hand at carbon skinning the b pillars, and get my rear window re tinted, but this time by a pro lol. Then ill put the car back in the bodyshop to smooth over the dewiper and nissan badge, and then some LED rears. That will hopefully be the exterior done then :p

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...