Jump to content

The 2009 detailing marathon for upcoming events...


Recommended Posts

Posted

....starts here!! :teeth:

 

After having had a go at the exterior paintwork a few weeks ago, it was time to start on the wheels, arches, exhaust, interior, engine bay, anything else that can be cleaned......

 

Exterior paintwork was here....

 

And after a few drives it looks like this:-

P1000565.jpg

 

P1000571.jpg

 

Not too bad I didn't think, apart from the usual brake dust build up and road muck.

 

The exhaust got some attention first. An attack from the Dyson, interior shampoo, AG Leather Cleaner, AG Leather Care Cream on the carpets and seats. The dash and plastics were wiped over and then dressed with Poorboys Natural Look Dressing.

 

P1000579.jpg

 

P1000580.jpg

 

P1000581.jpg

 

P1000582.jpg

 

Then the exhaust got some elbow grease. Trusty old Brasso did this!

 

P1000577.jpg

 

P1000578.jpg

 

The big bit of work so far was the arches and wheels. I got a new set of Rays about 18 months ago. I haven't had them off for about 9 months so they needed a proper clean. I usually use water / CG wash dilution on them and get through the depth of the wheel while removing chunks of skin off the back of my hand!

 

Before:-

 

P1000584.jpg

 

P1000585.jpg

 

P1000586.jpg

 

P1000569.jpg

 

Then the wheel got cleaned with Chemical Guys Citrus Wash n Gloss and diluted AG Clean Wheels on the tough bits. Was pleased to see the sealant had prevented the troublesome corrosive Rays from showing any real signs of aging. Initially came up ok.

 

P1000594.jpg

 

P1000593.jpg

 

The wheel were dried and left for a bit......

 

The arch area before:-

 

P1000590.jpg

 

P1000589.jpg

 

P1000588.jpg

 

Dirty Brembo:-

 

P1000587.jpg

 

The arch was sprayed with AG Engine and Machine Cleaner and a range of Envy Detailing brushes and other cleaning brushes used to agitate and get it into all the areas needed. Then the arch was dressed with AG Vinyl and Rubber Care, all brake bits re-greased and cleaned.

 

P1000595.jpg

 

P1000596.jpg

 

P1000600.jpg

 

P1000598.jpg

 

The wheels were polished with AG Super Resin Polish and then sealed with Chemical Guys jetSEAL 109. The tyres dressed with Meguiars Hot Tyre dressing. Wheel nuts polished with Brasso, all put back together. :)

 

P1000601.jpg

 

P1000602.jpg

 

 

Arch before and after

 

P1000588.jpg

 

P1000598.jpg

 

Wheel before and after

 

P1000569.jpg

 

P1000602.jpg

 

Next up, the rears and the engine bay......!

Posted

Looks good Rob. Spent about 12 hours on mine over the weekend, need to get the wheels off on the weekend if its dry & my new product turns up ;)

Posted

Nice work mate. :thumbs:

 

Makes me smile every time I can wash my wheels with just water and shampoo after all the effort it too to put 4 layers of PB wheel sealant on. Makes it soooo much easier and no more scrapy knuckles!

Posted
we've got some work to do craig ;)

Using a pro to do your dirty work is cheating. Craig, give him a rotary polisher and let James do the work :lol::scare:

Posted
Nice work mate. :thumbs:

 

Makes me smile every time I can wash my wheels with just water and shampoo after all the effort it too to put 4 layers of PB wheel sealant on. Makes it soooo much easier and no more scrapy knuckles!

 

I sealed mine in my living room while watching TV. :lol:

Posted
Nice work mate. :thumbs:

 

Makes me smile every time I can wash my wheels with just water and shampoo after all the effort it too to put 4 layers of PB wheel sealant on. Makes it soooo much easier and no more scrapy knuckles!

 

I sealed mine in my living room while watching TV. :lol:

Amanda wasnt impressed with me doing mine in the spare room and dashing up and down the stairs every 20mins to do another coat :lol:

Posted

I just carpeted the garage and got myself a stool and did it in there! :blush:

 

I might get out and do the rears tonight.... :D

Posted
I just carpeted the garage and got myself a stool and did it in there! :blush:

 

I might get out and do the rears tonight.... :D

 

 

Pimp. ;)

Posted

its not cheating its just gettin the job done right by one of the best :#1:

 

id end up taking a layer off paint off never mind putting a shine on it!! there'l be plenty out there who have theres detailed and say they did it themselves im sure :lol:

 

i do all the engine work though B) just like craig to work his magic on the bodywork

Posted
its not cheating its just gettin the job done right by one of the best :#1:

 

id end up taking a layer off paint off never mind putting a shine on it!! there'l be plenty out there who have theres detailed and say they did it themselves im sure :lol:

 

i do all the engine work though B) just like craig to work his magic on the bodywork

Bah, get a dual action/random orbit polisher and you wont do any damange, just steal Craigs paint depth gauge to make sure you dont take too much off! :lol:

 

Rob: I wanted to carpet our garage (my old dear even had enough of her old carpet to do it with) but as Amanda parks in it every night, we thought that given this countries weather a wet carpet might not be the best idea.

Posted
its not cheating its just gettin the job done right by one of the best :#1:

 

id end up taking a layer off paint off never mind putting a shine on it!! there'l be plenty out there who have theres detailed and say they did it themselves im sure :lol:

 

i do all the engine work though B) just like craig to work his magic on the bodywork

Bah, get a dual action/random orbit polisher and you wont do any damange, just steal Craigs paint depth gauge to make sure you dont take too much off! :lol:

 

Rob: I wanted to carpet our garage (my old dear even had enough of her old carpet to do it with) but as Amanda parks in it every night, we thought that given this countries weather a wet carpet might not be the best idea.

 

 

Squishy floor is the dogs Chris. I have it in mine. Got it from Costco. Clips together and provides nice insulation and a good spongy layer for if you're working!

 

Still, not sure how it'd cope getting soaked all the time.....

Posted
wish i could get mine in the garage it just gets abused outside all year long :dummy:

 

+1

 

Garage isn't big enough.....

 

I need to build a big garage for the Zed and my bike. B)

Posted

well as most of you know still at home and no room in there even though theres enough room for about 5 bloody cars, with my dads car, bikes, 'bloody' trains, workshop you wouldnt beleive it :thumbdown:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...