nissanjuke Posted November 22, 2015 Share Posted November 22, 2015 Had this fitted during the week,only had a gain of 4bhp, and I have millteks,hfc,s and a pop charger,the car I must admit runs smoother,gear change is better and I do get a nice purr from the car ,has anybody else done these mods and what results have they had.?? cheers Quote Link to comment Share on other sites More sharing options...
Ricey Posted November 22, 2015 Share Posted November 22, 2015 I believe you really need a remap to unlock the power the mods add. Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
veilside z Posted November 23, 2015 Share Posted November 23, 2015 How do you know it's 4hp did you rolling road before and after? Contact Abbey or Horsham for up rev. Quote Link to comment Share on other sites More sharing options...
Payco Posted November 23, 2015 Share Posted November 23, 2015 As Ricey says the final part is a remap to unlock what you have done. Quote Link to comment Share on other sites More sharing options...
nissanjuke Posted November 23, 2015 Author Share Posted November 23, 2015 My car had the uprev done in may at dynatune by CHRIS ,then bought plenum spacer and pop charger over the coming months,as you know z fever does empty your wallet,then this month had a fluid service check,fitted plenum spacer/pop charger then CHRIS at dynatune linked it up again and tuned it. Quote Link to comment Share on other sites More sharing options...
Ricey Posted November 23, 2015 Share Posted November 23, 2015 You'll lose BHP with the pop charger so maybe it's offset itself again the spacer so you've only seen 4bhp instead of perhaps 10. Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
PPod Posted November 24, 2015 Share Posted November 24, 2015 What did you get at the hubs ? Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted November 24, 2015 Share Posted November 24, 2015 Don't forget that the gains are accumulative, IE a small amount from each mod, the plenum spacer although giving a gain, its more to do with getting better airflow distribution to the rear cylinders which are somewhat compromised but the slightly wedge shape of the plenum. Quote Link to comment Share on other sites More sharing options...
nissanjuke Posted November 24, 2015 Author Share Posted November 24, 2015 Here is my chart from dynatune, Quote Link to comment Share on other sites More sharing options...
Chris@Dyna.Tune Posted November 25, 2015 Share Posted November 25, 2015 I think a bit more information is needed here, here's a copy of the power, after the plenum spacer was fitted, before and after tuning: As I explained on the day you can see the first run netted 233bhp@the hubs, down considerably on the original 248 bhp, this could have been due to a number of reasons, fuel choice in particular. After tuning it gained 17bhp @ the hubs. I can't remember for certain what fuel was used for the original tune but for this one Nissanjuke confirmed it was standard supermarket petrol (95RON), although it only gained 2bhp over the last power figures on the day it gained 17bhp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.