3FIDDYZ

You interested in a part x on the k-sports? I take it yours is a JDM car?

Have a search for insurance on here, lots of threads already! Adding a partner or parent with a clean licence can help get the price down!

Look good Scott, intrested to see how they match up

Unlucky mate.... Insurance? Unless you got protected no claims I would get a price... Guessing John at JC Auto Refinshing in Cranleigh wouldnt be charging you much more than £250 to sort it out for you.. Would cost you more than that in premium increase and excess I would think...

Nissan 4 points, 2 top 2 bottom for the brackets and then 4 screw on cap things to secure, 5 min removal... Tried to fit my 164 in and its not a nice fit on the board!! got in the way of gear changes! Zaps is a push fit...

Very nice. Did you get these off Andy @ Kudos on here? I saw one he had on his display stand on Saturday and they looked very smart

Nice pics in Monaco, but I dont think they are going to sell the car! As wont the misdiscription of the veilside kit, as apart from the spoiler (is that a veilside?) there isnt any veilside on it! Nice car though and unusual seats, needs some better pics of just the car and the engine bay. And the scuff, just get it over to Johns in Cranleigh, for the sake of a couple of hundred it wont give someone the chance to beat him down on the price by more than the cost of the repair!

I use the spray version but foam would be good... Meguires do a nice set of degreaser and then a spray to dress the plastics and rubber parts

Vertical from Nissan , Holdcroft or zapbantist on here as he makes a very nive alternative! The horizontal one is from Nissan only!

Was gonna say goodwood, its where the brekkie meets are held isnt it? nice Targa... Still wish they did the Zed in that setup

great bit of kit!! feels lovely too!!!

Hi bud, the catch can has a short tube and actually looks like the cusco one with HKS emblem :http://www.z1auto.com/prodmore.asp?model=350z&cat=engine&prodid=1358 I was thinking of fitting it in the front bay in the space vacated by the CAI just like in the pics but still does not show where both pipe plumb into i think one is from the feed that goes into the zed tube but what about the other? Depends on what size pipes it comes with and what you want to vent. When you remove your CAI you will see a pipe that fits under it. follow this pipe and remove, then fit the catch and put one pipe to under the cai tube and one to the end where the hose used to be! This should be a 16mm diameter hose.... If the hose is smaller like 14mm you want to be looking at the other side of the engine bay... Where the sparks are on the left there is a hose that links to a connector on the front of the plenum (you will need to remove the engine cover to see it. remove pipe and fit CC with the hoses linking to the 2 connectors from the removed hose... Not sure which side is better to vent. most of the cusco ones seem to be fitted to vent on the left hand side of the engine bay, but I have seen the ones venting from the CAI too!

Is this true for a UK spec car??? I have a NISMO CAI that the previous owner fitted in a short pipe form, and handed over a box of bits to me when I bought the car, if it really is possible to just diconnect the passenger bottle and block the pipe this would be a perfect solution Yep have fitted one to a UK car and all worked fine! Jack car up, wheel and wheel arch liner off and fit the extra tubes. Job done!

Yeh, need to get a few orders together for the first batch of the caps as they need to be made in a run rather than one offs or the price would be very unreasonable.. Payments will be via PP if thats alright with everyone (via money owed to save the Surcharge!) Add yourself to the list on the bits your interested in Set of 3 bottle caps 1. 2. 3. 4. 5. 6. 7. 8. 9. 10 Single bottle cap 1. 3FIDDYZ (Polished) 2. Adriank (Orange Anodised) 3. Linconbaggie (Polished) 4. Clarkie34 (Polished) 5. 6. 7. 8. 9. 10. Harness Cover 1. 3FIDDYZ 2. 3. 4. 5. 6. 7. 8. 9. 10.

HKS style catch can? Any pics? Never seen that before, but guessing that the guides for any catch cans will be the same... Long or short tube CAI? If its short its a peice of pi55. Just have a look at some of the pics on the forum and it will help... not many places to fit this stuff..

Andy from kudos (Andy on here!) sells some nice Finichi 20" rims that I think now come with black centres. You then have a few Rays wheels that come in that size but not many available, Infact not may 20" rims around hence why you may not get may pics! Googling 350z 20" may bring up a few results!

Or direct from Nissan.

Have you taken off the door card? The wing mirror facia can only be taken off when the card is removed IIRC.. Removal here.... http://liljerk.morpheus.net/350Z/front_speakers/

cant you get the drimel out and cut that down?

What make of DD? My kenwood fits perfectly....

Dont you have to pay tax on the car if its on o'irish plates?

Depends if you want the knurled edge one to go with the bottles or the one thats in the set of 3...

Best one I can find is in here http://www.vector-logos.com/result-en-nissan.html but search for "350z Vector Graphics" and you can find others in both web and in Google Images!

Sorry to hear dave

I think you dont stand them upright as you may get flat spots. Looking how they store them in tyre shops they always seem to be on a rack so the bottom of the tyre isnt touching the floor..