3FIDDYZ

At a guess his will need to go flat!! If hes going the direction I think he is! Mine need doing a little again mate, as there is a little rub.. could be that I need some air in my tyres though!

Best and I think only person that has one of these is Steve on his race car.... Sounds amaZing!

zmanalex is worth a PM as he has been known to have a few set of brembos lying around

That 5zigen wasnt that loud Wiz, with manifolds, decats, 5zigen y-pipe on mine it only got to about 120 at 4k!!! Miss it in the tunnels!

Great choice mate, am sure you will love it, your Zed will change!

Sounds like your hinge sections may be a bit gunked up (that is assuming you havnt got bonnet lifters!) they can get a lot of dirt and crap down in them.

I think you run test pipes to the ZYX Ypipe and then on the XZY you have a choice of 3 sections to add in... All the options and pics on here http://www.my350z.com/forum/intake-exha ... clips.html

Yeh there are a few options http://www.lsptraining.com/?referral=ad ... 4wodq1fhcQ They do weekend and 4x evening options, a bit pricy but supposed to be very good..

The revup dosnt seem to respond to the Uprev as much as the 03-05 cars. Speak to Mark at Abbey as he has more experience than anyone else with all the different varients...

Was going to do one at the London School of Photography.... Just havnt got round to it!

Because the spokes on the wheel go to the edge of the rim I would go 19 as the circumference of the rim fits the angle of the arch better. IMHO I would go for 19" 9.5 front and 10.5 rear with a +20. Great choice of rim and a great choice of football team

Missed this, whats the apology for? PM'd to not disrupt your thread too much!

IT Training? What kind of IT training do you deliver? What you looking for? If we dont deliver it I can get it at very very good rates! Tech, Methodology etc etc certified or non certified... PM me and I can see what I can do for you!

You can see moods? I can only see a big pair of manarys!

Even if the pics were in real easy 1) locate screw 2) insert screwdriver 3) turn screwdriver 4) yes you fool.... anticlockwise! I still couldnt do this... no patience!! the circuit board would be one big piece of solder!! So kudos to those that do this stuff... Am happy to swap my expertiese in other areas in exchange for LED work... Any of you clever guys need any IT training!!

Thats some work and looked amazing when done. Still havnt had the oppertunity to drive one of them... Driven the Escort cossie but not the daddy! To be put on the list!

Apologies... moved out of a traders thread!

+1 The problem I find with that is that all the 'old boys' get at the front & then everyone else gets shunted to the back See Japfest for the last 3 years where all the 350s are at the back Lol!! With the old 240's, 260's and 300's they will have had loads of experience of doing that mate... we are going to have to wait 20 years till we can do the same to the 740z owners!

Should I take that as a no for more 350z's in one place then? Fair enough! I have tried.... Again!

Are we going to do this one as a joint 350z meet? More cool Zeds, more impact, share the love? If we are then can someone give me a shout and we can work on the detail and we can publicise it. Will be as good as JTS at silverstone when we were all on the same pitch...

If you got the room or are remoddeling the room I can highly recommend B+W CCM65 that will go in ceiling... Great sound track... Also if you need a stop gap, I just pulled all the AV stuff out of my flat I was renting... Sony MS525 speakers and Sub with a couple of floorstands, Sony STR-DB 1080 Amp, Sony DVP-S725D DVD (And a top of the range Sony 32" LCD (the floating glass design one!) they may be going on Ebay soon!

I dont think so but from what I understand the squaddie wandered in around just before 11am

Someone just bought a ticket to the Vulture Club! And what's this said Vulture Club? Do I get anything free? T-shirt, car stickers or etc? Say it as I see it! Say it as I see it! Lol LOL!! Feel free to make it into a sticker and put it on your car

Probably about 2006!!!!!!!!!!!!!!!!!!!!!! Its not a cloan or a scam for the reason listed above, there are a few owners on this and the other 350z site that have got a bit of a bargain with a pre registered car. As sarni says, its the right price for an 06 car. Check the plate in the engine bay on the left hand side and this will give you the year of manufacturer!

Someone just bought a ticket to the Vulture Club! LOL!!