3FIDDYZ

I prefer to apply lube to the head LMAO!! Sicko.. I clearly said head gasket Anyway, sorry for the thread hijack guys, I'll be willing to help you do the work. You will be asking Nurrish if he wants you put locktite around your nuts before he torques them....

WRONG............... Just wrong!

Hi, Anyone got any azure blue (B17) touch up pens, its for a friend that dosnt post much on the forums.... He needs a few so any help would be good... Mark

+2 need more details. Its quite common for people to select the wrong tyre sizes when fitting them up to a Zed. There is a different radius of tyre from front to rear and some people dont know that. +3, need to know the tyre sizes bud ? When I saw you had posted I though you would be asking for pics!!!

Just to add.... Q: Does my exhaust need some backpressure to work properly or make more power in a N/A application? A: HELL NO!! This is a myth. High exhaust velocity is good, backpressure is bad. The way to achieve high exhaust velocity is by picking the correct sized exhaust for N/A. If your exhaust is too small, it will create backpressure. If your exhaust is too big, the exhaust gas velocity will be too slow. That is why people do not drive around with 4" exhausts for N/A.

So no torque loss with all that free-flowing? wtee?? Nope, non if you are getting it mapped etc wtee = warantee..

Not my thread Its everybodys!!!

If I was there on Saturday I would have done it... but not there till sunday! If its not done by the time I get there will help!

You cant see them! They are more for flow reasons... Stock ones are 3 unequal lengths, aftermeerkat ones are 3 equal, any tuner / reprog should be telling you this is one of the major holdups and are worth changing to prior to flash / chip! BTW you still got any wtee on your car?

OT but then it is a weird thread! When did that happen? I thought this was and always would be a 350z forum? Back OT... Nice RC!

Tasty stuff. Are you buying them or have you already got some? these 5zigens look a bit smarter... http://z-store.co.uk/index.cfm?fuseacti ... rentCat=30 Not the nismos, but fujitsubo ones Envy have that 5zigen set in stock, PM sarah or Gaz for a good deal

oooo, interesting! which mats? nismo ones? Nope, think he means custom ones, ie not made by Nissan / Nismo...

Hi cost to fit, round 6 to 8 hours needs tune to get the most out, Will help though to get the most out of the tune may be LHD, hard to fit with RHD Stay tuned for my update!!

Any chance you can make it a sticky till saturday night? Stew says - Stickied!

Just thought I would start a thread here for those going to wales that have a few bits and pieces for sale, or are looking to buy. Also if you know someone that lives close that has bits for sale or wants something off the list, you could be doing them a favour as acting as a transporter~! It will also save the P+P!! Just put the day(s) that you will be there, and the items you have for sale / trade / wanted... 3FIDDYZ (Sunday) 2 Nismo floor mats, good overall condition but need a little repair on the hole that connects to the drivers seat £35 1 Spills Grounding kit in red and silver £50 1 set of 5Zigen wheel nuts in red £45 Happy to do a trade for other parts so what have you got, or do a deal for the lot.... Next!!!

Mat mine was a good inch lower than yours and didnt have an issue round those parts..... on the worse bits there may be a scrape under the spoiler that you cant see, and to be honest, your y-pipe will scrape more than then spoilers!

Cry Babies....... we cant play football so we are taking our ball back... MopHeaded one will cut a deal, FIA will change the rules, fence sitters will bring their ball back..... Just cant win against good old british engineering and a british driver... again!

Jerry, I had a veilside one one mine and it was held on with double sided tape and the 4 bolts (2 each side) Tape was on the centre section. Had no issues! as long as the fit is good and if CS says it is then it probably is but the veilside one wasnt a good fit on mine but a great fit on the guy who had it after me!! Go figuer!! Tiger Seal is a bit more permanant!

Strange, I would use a rod and a gun.... must be hard casting a 4x4 Oh! L200 for me, great bit of kit!

Looks like Tom didnt hang onto it for long... that post was made in April!

Sounds like a card slot for the tolls in Japan.... Am guessing its a JDM! Dont know about the other without pics!

Your favorite!!! To the OP, did it work and also any mods on your car like hi-flows?

Just out of interest where is the BCM located? Is it anywhere round the brake fluid reservoir? I have noticed there are a few holes round there that if you get the leaf mulch collecting it holds water... always good to check the holes are not blocked when your cleaning the engine bay... Bazza, if you email zmanalex on here he may be able to help or at least point you in the right direction as he may have the parts and facilities to help... It should be waranteed, but am guessing you have the problem of moving it at the moment to any facility...

Think we need to have a used parts stall!!!

rhdjapan.com japanparts.com jdmperformance.co.uk +others.... Make sure your buying RHD ones as the LHD dont fit... obvious but they have been bought from the states