Ian

Get them

Can you get the exterior carbon door handles?

I heard reference in another post that you can reset the ECU by use of the peddles. Could someone explain how this is achieved. many thanks mark The following is the correct procedure for resetting the ECU 350Z ECU Resetting Procedures Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON. A stop watch or an analog clock with a second?s needle will be useful. Operational Procedure 1. Confirm that accelerator pedal is fully released, turn ignition switch ?ON? and wait 3 seconds. 2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds. 2a. Fully depress the accelerator pedal (HARD). 2b. Fully release the accelerator pedal. 3. Wait 7 seconds**, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. **The 7 seconds starts from the end of the 5 seconds period above it does NOT start from the 5th release of the accelerator pedal. 4. Fully release the accelerator pedal (while the CEL is still blinking) 5. Wait about 10 second. 6. Fully depress the accelerator pedal and keep it for more than 10 seconds. 7. Fully release the accelerator pedal (The CEL light will continue to blink but at a a faster rate). 8. Turn ignition switch to ?OFF? position and now you can start the car. The CEL light should be gone. If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU

Thats a real shame, Hope its ok once its dried out

I got 26 over 500 miles on sunday, pretty much all motorway driving

Fookin hooligan Was because my alignment was so far out. The insides of them were completley bald but the outsides were like new

I was doing the pedal technique atleast once a week. Im crossing fingers, toes and anything else I can that it stays this way

I need to know Red would compliment my wheels nicley This is one purchase I may have to put off for a while

My rears lasted 2k

:yahoo: Shame about the rust though

I need to know Red would compliment my wheels nicley

Thats my point, When I reset using the pedal reset it always came back on, since using the software and code reader to do it im running decats with no issues Was just wondering why its ok now if the resets are the same

Need to know prices though

Any shop window that I pass

No

Since installing my Decat pipes earlier this year I have had the CEL on. I fitted the Non foulers & did the reset with the pedals - This usually lasted about 50/60 miles until the CEL returned. I recently bought an OBDII scanner and Digimoto software. I checked the codes & all 4 related to the 02 sensors. Since resetting my ECU using Digimoto I've done about 700miles & have not seen the CEL return. Is the pedal reset anything more than a temporary fix?

Blade APS TT coupe on the DSA stand at Santa Pod GM import coupe in the public car park at Santa Pod A Zed owner who was talking to me about the Ipod link (Didnt catch your name sorry) GM coupe pleate(L30N **) in Pengam tonight Anyone want to own up

Noooooo dont do it

+1

Anyone still going to this?