MicktZZZ

by way did you use a breaker bar or impact wrench, is one safer then other to use ?

Oops just realised I have already removed the from 2 19mm subframe nuts when I took off the kidney braces .. at least they came off with no drama but that was to be expected as kidney braces are as new having been replaced just before I got car, have started clean up of the rear nuts, wire brushed to remove as much rust as I can and the lots of penetrating fluid which will continue to do until weekend when I will try to break loose

Thanks both seen both of these videos and Im quite happy with process and it doesn't look too bad, sounds as if working on the slope just makes refitting more difficult to get on rather than possible misalignment of the subframe .. suppose first test will be removing pin stay and seeing how hard it is to remove the subframe nuts they are very rusted up

1. andy james Paid 2. Zelda Paid (11:20 track) 3. George 1966 Paid 4. Andy_Muxlow Paid 5. Buster- paid 6. nismoandy -paid 7. SamTripp52 8. DAZ8235 - Paid 9. JonLonghorne99 - Paid 10. SuiSid - Paid 11. LAB99 - Paid 12. Millicano - Paid 13.Sebastian PAID (Track 10:20, 12:20, 14:20) 14. SHEZZA - Paid 15. MicktZZZ - Paid (just once on track at 12:20) First Z and first show looking forward to it .. fingers crossed to the weather gods 🤞

I am treating various bits of rust at the rear end of my Z, I want to remove the pin stay that I believe is held on by 2 of the rear sub frame nuts, so I'm thinking if I'm removing these 2 nuts why do not do a proper job and take off or just lower the full rear subframe enough to treat the rust around it, have watched a number of videos and read a few posts and it doesn't seem a too scary job, and it helps that my car is not a daily so I can take my time. One of my worries though is my drive is not totally flat it slopes a bit front to back and left to right, I can jack and support car safely enough but just read somewhere refitting the subframe should be done on a flat with car level to ensure subframe aligns properly ?? Apart from this any reason I shouldn't try this Cheers

Hi Im new into a Z, and somehow stumbled onto this thread think I was reading about camber arms .. anyhow have just spent my lunch reading from about page 16 🤣 must say your car looks mint and your dedication certainly shows, this will be my go to thread when it comes to finding how best to clean and detail my car 👍 ps wheels look sweet both AM and OEM

Hi thanks to those that have paid already, the braces are all wrapped ready to go, I was waiting till the bank holidays all got done before trusting Hermes as it is I will be sending out 2 or 3 a day this week to save giving the Hermes driver a heart attack 🤣, could you send me your email addresses and mobile number for the Hermes tracking cheers

Hi yeah 6xM8 (std pitch) 30mm long I've ordered some from Westfields (Flange Bolt Hex Head (Unserrated) M8 x 30mm in A2 Stainless) and then 4xM10 (std pitch) 35mm long

I've got some addresses so will start sending these out later this week, if others want to send their addresses will also send out, remainder to pay is £49 to same paypal account please, no desperate rush but before end of January when credit card bill due 😬 cheers

Hi all, sorry but it looks like I am not going to be able to get these painted, various reasons but mainly my son doesn't want to do them and I haven't got time, so am going to have to send out unpainted .. good news is they're a tenner cheaper (£60+£9 delivery) and you can now paint whatever colour you like now .. I'm going with some hammerite smooth red 😀

Hi all well collected braces today, they look great or as well as a piece of metal under the car can look 🤣 Good news is they fit, I must have checked measurements 10 times but was still unsure until I got them back, and no long catches my exhaust Plan is to de-grease them and paint over holidays and then ship them in January to avoid Xmas post issues plus lets everyone get remaining cash together, unless anyone needs it urgent if so let me know. if you want to start sending your addresses I will prep the parcels, delivery will be £9 via Hermes next day Pictures of unpainted brace fitted (don't ask why they are upside down cos I don't know !!)

Hi all appreciate the deposits, going to order these now (4-5 days lead time) but means I should get them mid-next week and be able to send out during Christmas week, will let you know when I get them from cutters

Great read and build so far, you don't do things by half that's for sure and at least all that horrible cash from the 240 sale isn't burning too many holes 🤣

Loads great in white 👍 .. 4th one says a lot for the brand

Welcome new to 350s myself but bought one for similar reasons but bonding with my son who's getting in JDM and from what I read they make great projects, solid starting platform with loads of aftermarket support mods etc.

Cheers will message you my PP details👍

Hi all so have confirmed the new design and price with the laser cutting company still all good, I'm actually up to 9 as have a couple of mates who want these who aren't on the forum 😮 I know I keep telling them they need to be on ! So I want to go ahead and order and I will bear the additional cost and hang onto the spare and advertise for sale separately as I'm sure someone will need one shortly So to progress can I ask for a deposit of £20 from everyone, I hope that's OK if you want to message me I will send you my PP details cheers

Hi I bought a TarmacSportz W brace but it catches on my aftermarket custom 3" exhaust, talking to TS they say this is unusual and they have fitted loads to other cars with 3" systems, but I can't see how I can adjust my exhaust so I'm now looking to get a brace made. So if you're considering the TS brace why not buy this and save yourself a few quid. It is as new however does show signs of fitting i.e. paint rubbed off around bolts tried to show in pictures These are £150 inc delivery new, so I'm asking £135 inc delivery or if you prefer to collect from Sheffield area £120 Alternatively if you're worried about it not fitting as well take a look at my post re getting brace made non-OEM fabricated W brace - anyone interested need to order minimum of 10 for best price - Group Buys - 350Z & 370Z UK (350z-uk.com)

No I don't see why not and 70 is cheaper than 150 by anyone's maths 😀

Did think about it but seen people saying it wouldn't have the same stiffness plus material more expensive, I'm thinking the problem why the oem rots is down to the design being prone to collect and hold crap so I'm thinking a simpler flat bar design together with decent paint will see it last at least as long as oem one

Just read your question again I'm pretty sure the aftermarket braces are designed as replacement for oem brace I've read quite a few posts and watched the videos on TS and they show them replacing Oem brace

Hi yes your right I've checked the TS brace and it's 4.9mm so 5mm should be OK, I have updated original post but this only effects single price by a few quid, cheers will add you to list👍

Hi mate u still got the carbon door handles ??🤞

Hi harrison140 have added you to list in new post if thats OK .. up to 4 🤞 hopeful non-OEM fabricated W brace - anyone interested need to order minimum of 10 for best price - Group Buys - 350Z & 370Z UK (350z-uk.com)

Sweet colour 🤙