Lewis_UK

Seems to be a common problem, I had EXCATLY the same. I originally thought it was my exhaust hangers, now have a new exhaust and its ALMOST perfect, still out thought. But do check rubber exhaust hangers/the metal brackets they hang, could be rusted/bent.

3 in 1: New Exhaust Rear Diffuser Rear Spats

You guys/girls using the Titan Race Pro S mainly Snjur: Snjur, you really using 10w60? How long you been on that weight?

PM Jon at Emperor Tuning, he was recently breaking a roadster that looked like it only had 1 good front ray after a crash. http://www.350z-uk.com/topic/111647-breaking-for-parts-2007-350z-wv2-roadster-rev-up/

This is what I'm using: NGK 6240 Laser Platinum: PLFR5A-11 No Turbo or Supercharger.

Hi Nic, How much did you pay for the sensor/s? Because I recently also fell foul to cheap aftermarket sensors which was not better than useless it seems. It seems the OEM really are worth their value.

I will speak to my colleague tomorrow/friday in regards to temp of print, I think it was close to the 250 mark. Thanks for you concern GM, I never considered this really. I naturally assumed that because of the temp required to mold the print, and the intake temps from the Zed, this would not be an issue. I think I'm going to do daily checks to be sure. I did check today, all still solid.

Don't see why not dude, you only use the throttle during ECU procedures.

Looks great CS2000, Thats came out soo consistently, looks like bandage material ;p Sent you a PM, let me know if you think any tweaks need doing, thickness/height/width etc

eBay, amazon.

I give you full permission(and anyone else) to re-produce as you please. If that's what you mean. EDIT: In fact, if this is something that gets going, I'm more than happy to make designs and convert to .stl for people to use if you give me dimensions/measurements and maybe rough picture etc. Or a bigger/smaller Velocity Stack mouth. It will help build my experience on what can be achieved.

Thanks I will try that. You mean RevUp stack? This was all done by eye and basic measurements from the intake tube being 3" itself. I searched the term "Velocity Stack" and found a picture on wikipedia: So tried to go for that sort of angle.

I'm deeply sorry Dave, but this was more for infomration and innovation. I think I would get in trouble from work if I started to supply and distribute. Or the other hand, I will provide a link to the ".stl" file create, and you can go to a company with their own 3D printer, send them the stl file and they will give you a quote on printing and delivery.(Which will probably be naff all) Example: https://www.3dprint-...load-and-quote/ EDIT: The website above just had alook properly, only do minimum order of £40, which this created is no where near £40, I would say less then £10 created+postage you could get it done, so dont use the website above tbh, just an example I found, loads of sites out there. Another Edit: https://www.digits2w...sls-containers/ If you check that website it seems the going rate is about £40 for the container they charge you to use. Material used: ABS 3D Filament Current dimensions of my mod: Width/Length Cylinder Diamiter - Top: 101.6mm - Bottom: 76.2mm | Height: 25.4mm | Curved Angle: 150 Degrees | Thickness: 4mm Their Container Size: White Standard £40: 110mm x 90mm x 25mm Link to the .stl file: https://www.thingive...m/thing:1770224 Richtrix is my work colleague(he let me use the 3D Printer to produce) so was uploaded on to he's thingi account when we printed.

So unfortunatly flyboy recently run out of Velocity Stack mods, and because I have an UpRev coming up soon I decided to take matters into my own hands. At work we have a 3D Printer(MakerBot) and we use AutoCAD 2016. So after a few hours of playing with CAD and getting used to I had come up with this: So my first attempt. As you can see the curve came out straight. Trying to munipulate CAD to produce a curved angle cyclinder, to also print out as a "3D Watertight Object" was challenging. This is Version 3: (Version 2 was very similar but have a thickness of 2mm which came out very flimsey, V3 is 4mm and solid) Real life result (Has currently been installed for about a week now and still holding strong): A little bit rough here and there, but I think will a little bit of light sanding will be very smooth.

(Tocuh Wood) If/when mine needs doing, I think I will be going for the Xtreme SMF Clutch. 350Z DE Version: http://www.350z-uk.com/topic/86628-introducing-xtreme-clutch/ (Scroll down page abit) 350ZHR + 370Z Version: http://www.350z-uk.com/topic/92517-new-release-xtreme-clutch-kit-inc-smf-and-csc-solution-350z-hr-and-370z/

I remember reading a quote on this forum from a reptuable garage on here saying "no need to replace master cylinder as I have yet to see one fail". Aslong as it's at their cost and not yours it's all good

Interested in the spacers + Panel filter. Rough mileage on spacers? And when you say hardly used filter, you mean it was used at one stage or?

http://www.kinetixracing.com/kinetix_350Z_and_G35_intake_manifold.aspx +30.5 According to photo.

Whats the standard on Nismo exhaust bore? Militek 3" bore. But shouldn't be a problem either way, people also like the motordyne xyz.

Do you use a "Performance" oil filter? What oil weight?

You've had a very nice turnaround, and to be fortunate about the trader you brought from being respectful and helpful towards this situation. You'll be getting an ever better car than you started, for nothing extra. Just be thankful it happened now and not after 6 months Always look at the positives and I'm happy it's all getting sorted for you.

Dirty MAF? Dirty TB?

Alex has literally just been relying to another member about clutches, see here: http://www.350z-uk.com/topic/111192-clutch-replacement-and-flywheel-traders-on-here/

Well worth the money whoever buys, best purchase I ever made, if not just for structural rigidity.

Evening guys, I know some people frown upon Japspeed parts etc, but for those who take the plunge like myself just to "give it a go" I come baring news. Some of you already know Japspeed use the 2fast2cool alias on eBay for their parts, but strangely mark it down cheaper. Turns out theres more. I went to buy a K2 Japspeed Exhaust and this is what I have found: Japspeed official eBay for K2, £331.55: http://www.ebay.co.uk/itm/JAPSPEED-NISSAN-350Z-03-05-K2-STAINLESS-STEEL-Y-PIPE-BACK-EXHAUST-SYSTEM-/160762016178?fits=Model%3A350+Z&hash=item256e29b1b2:g:icYAAOSwWnFWA7t~ Japspeed alias performance-motorsport-parts, £299.99: http://www.ebay.co.uk/itm/NISSAN-350Z-03-05-3-5-V6-STAINLESS-STEEL-Y-PIPE-BACK-RACE-SPORT-EXHAUST-SYSTEM/231135531246?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D37440%26meid%3D0ec198322c404ff1b572130ea3f1e00b%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D160762016178 Japspeed alias 2fast2cool, £289.99: http://www.ebay.co.uk/itm/NISSAN-350Z-Z33-03-05-3-5L-V6-COUPE-STAINLESS-STEEL-Y-BACK-RACE-EXHAUST-SYSTEM/351044971263?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D37440%26meid%3D0ec198322c404ff1b572130ea3f1e00b%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D160762016178 Japspeed alias uk-performance-uk, £229.99: http://www.ebay.co.uk/itm/NISSAN-350Z-Z33-3-5-03-05-STAINLESS-STEEL-Y-PIPE-BACK-RACE-SPORT-EXHAUST-SYSTEM/150710379523?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D37440%26meid%3D0ec198322c404ff1b572130ea3f1e00b%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D160762016178 I myself brough from uk-performance-uk being the cheapest, as you can see from pictures and description, no mention of Japspeed. Got delivered today, Japspeed logo are on there. performance-motorsport-parts, 2fast2cool and uk-performance-uk use this address: Barry Scott Units 2, 3 + 4 Southern Ind Est Southern St Manchester Lancashire M28 3QN United Kingdom Japspeed: Jap Speed Unit 19 Oakhill Ind Est Devonshire Road Walkden Lancashire M28 3PT United Kingdom Just making this post to make people aware, as you'll proberbly end up paying more for the same parts, just different sister companies.