Mopedmark

Lovely Pussy mate

You could Perspex under the bonnet vents or I know a man that can

Looking good mate

Just trying to help out my fellow Zedders mate,

Well this is another little gem that I have for you polished plenum,this is on an exchange basis I will send you a fully polished plenum out for you to fit and then you simply return your old one to me without damage please as yours will then become the next members who orders. Theses are professionally polished and the inside is Vapour Blasted so you do Not inherit anyone else's dirt, before we start, after blasting Blinggggg there you go all blinged up and all the hard to get at parts and this is £95 including delivery

Ok guys I better start a little list I currently have one spare so it will take me a little time to get these turned around but I am on the case, List is as follows: 1: shire350Z 2:wizurd 3:KyleR 4:ianphampton 5:

along

2 Bhp there

Thank you Ash6812

Oh yes, thanks for the reminder 14N the springs are refurbed as well

Thanks Humpy/shire350z your both On It Like A Car Bonnet Catch

If you can get a meet on I'm sure we could bring a Posse down especially if it was a little nearer to the M4 bridge :wink:

Not an easy job in situ so a very good job,

It's good stuff is that,

Hi Members, I have been Blinging up your filthy dirty oily Bonnet Catches for a select few and I have been asked about it so here we go, for £35 including delivery, I will send you a fully restored Nickel Plated Bonnet Catch,when you receive the catch you fit then send me yours so I can get it ready for someone else you also get three shiny stainless bolts for refit, remember this is a shiny part so you must look after it accordingly,keep her greased and well oiled up this is what you will take off and this is what you will replace it with this is a simple yet very effective mod 3 bolts to take off then un clip the release wire,

Thanks guys more coming soooooooon

We all got Tangoed

And here's one of the Humpmeisters bay and it also got Tangoed

I have also got 14N to make me up this boot divider which lights up when I open the hatch brilliant job mate massive

Ok people here is what I have been up to since my last update, have managed to fit a pop charger ( thank you very much flyboy,) this in turn made me make a Perspex see through cover for it we even made the brackets out of Perspex I also vented it for more air flow, I added a temperature gauge also this is for me to keep a check on the heat under the cover.I painted the maff sensor tube and finished the throttle body off with purple flashing of paint. Now for the difficult bit, I have painted the radiator holder/front bracing,this is not for the inexperienced painted as it is hard work and will require proper paint air gun and compressor,this ended up being a full days work and the masking up is a big job, here are some pics

As you can see Sunday ŵas very busy but it was exceptional

And a few more

Ok Zedders more pics some a little different http://i1303.photobucket.com/albums/ag145/mopedmark7/287b635e0e3e9c4bfe33eb78707bcc54_zp'>http://i1303.photobucket.com/albums/ag145/mopedmark7/287b635e0e3e9c4bfe33eb78707bcc54_zphttp://i1303.

Ok will do Sent from my C6603 using Tapatalk

Why don't you try a simple little refurb yourself cost you a can of carbcleaner for a couple of quid,