14N

to the forum. Good luck with your quest

Might help http://www.350z-uk.com/topic/70450-induction-kit-heat-shields/

OK, so not the most exciting race on Sunday, gutted for Cal and was a nail biting final couple of laps for Dani and Marc. Good job those Repsol Honda's aren't fitted with mirrors! So at this early stage, anyone want to make predictions? Top 3 positions in the chmapionship? Where will Cal end up next year? Is Rossi past his best? Should he really be on the factory Yam? Will we exer see Randy DeP's Mrs (Lauren Vickers ) on the grid ever again?

I've got a standard system fitted with a K2 back box. It's my daily driver and it sounds nice, with no drone etc and sounds fine on the motorway etc. I know Japspeed gets slated for it's quality, but mine was fitted to the car when I bought it and has now been in my possession for 15 months and about 14,000 miles, through winter etc. It hasn't fallen to pieces yet, doesn't rattle and still polishes up nicely. It is very slightly louder than a stock exhaust and does sound 'nice'. Personally I would like something a little louder, so combining it with HFC would be my next option, or just change it for a Cobra if/when I can afford to. If I were in your position and I could afford either the HFC or K2, I'd maybe go for the HFC first. But it would depend on the condition of your OEN backbox. If it's looking past it's best and may fail in the forseeable future, go back box. Also, I've got a brand new K2 backbox sat in the garage that is surplus to my requirements if you're interested

Is this the one that was at Japfest? Nice subtle mods....

Hello and

Bargain

Possible non return valve problem? You normally still get a little fluid at the wipers though rather than nothing at all?

Good times indeed

Cheers. Not too hard at all. Just need to be carful as you're dealing with plastic clips, so best not do it when it's cold as they're brittle. Pop the B pillars off, there's one screw under the B pillar then there are eight hidden under the rubber door seal. Just pull it back to reveal them. Don't need to remove the A pillar completely, just pop it up so you can lift it enough to put the vinyl underneath

Aaaaaaaaaargh!!!!!!!!!!!!!!!!! Pins and needles. He's smooth. So Vlad, what were you actually looking for when you found this gem? Are we a bit shy with the ladies mate?

What he said

Cool. Tell 'em I sent ya! Where you located then Steve?

Steve and Jack. To answer your questions in one post, they're based in Brierley Hill which is (as Steve said) just outside of Dudley. And Steve, the costs I quoted were everything. So I got the lot done for £150 all in. That was for all materials and labour.

Link/vid doesn't work (On my phone anyway)

Why are they so hard to get hold of? What happens to them?

I had another look earlier.... i was interested in the snakes and cars honest Sounds like I've missed an interesting thread, as I like snakes and cars....

http://www.350z-uk.com/topic/72384-led-rear-lights/

This is fun! (But depressing as you say Kyle. I can afford the insurance, but I'm about £50k short of the actual car purchase). GTR premium = £560.

OK, so it's that time of year again so I'm hitting the comparison sites. Got a good quote that I'm happy with on the Zed of £334. So, just for the hell of it, I thought I'd edit the car details and see what my dream car would cost to insure. So all I changed was the car and nothing else. So still parked on driveway, 2 claims, 12000 miles a year (daily driver) etc etc. A 2005 Lanborghini Gallardo V10 with a value of £60k would cost me, fully conprehensive, for a year - £506 I paid more than that for the Zed last year!

http://www.350z-uk.com/topic/71728-fsbatch2-custom-anodised-plenum-spacers-170/

Hello and Dan