jumping350

having almost blow torched my face off i would suggest going to a garage to get nuts cracked,i got a guy in chessington who will do it if you want put it this way i doubt you will be able to get enough leverage with stands unless they have been loosened before....chances are under the car you will snap a bolt and will have to drill out and replace. y pipe to centre pipe notorious for snapping..y pipe to cats no chance, with mine replaced y pipe and cats as one unit infact they are still one unit now

to be fair, it was a wonderful drift into the curb might of made it if his entry wasnt soooooo wide!!!!

i always get asked if i would like an alarm clock with built in torch good result on fuel though

thought i would put this in here so i wouldnt start another thread..i too am having difficulty finding right tablet im only interested in it having android and bluetooth so can be compat with my phone and of course fitting! would it be possible to just put in a bluetooth dongle in one of usb ports and be able to run bluetooth normally like that??then can just look for normal tablet that would fit??

sounds like there **** up to me

is your car definately a HR?

i keep hearing of this passenger ciggerette lighter ive got an import but actually never checked so will have to take look, thanks Marzman and SMD. SMD il prob take a trip to yours some time if you dont mind with a box of goodies to go in the car if you could give your two cents on it

Hi all getting obd2 thingy and android tablet but would like to keep my throttle controller any suggestions what i can tap into to hard wire not sure where to start any help appreciated

its not actually a glass roof he had it painted black ohhhh sorry one of those days glass roof would be cool though

amazing! any pics from the inside out?

Try RT performance on here

can i just buy the right hand one

i got my greddy one for £20 and am customising the colour on mounts and wrapping it

ive got an 'eyebrow' the other one flew off on the m3 your welcome to have it

you maybe be right with vale but never underestimate the g.o.a.t im just hoping he can pull it out the bag like he used to..im glad stoner is going he is a douchebag, most miserable champion at anything (though can ride the wheels of the bike and always a shame when one of the big guns goes..means one less racer to fight at the front) AGV sun and moon now theres a throw back think theres a 2012 version now not sure young bradley will cope ok, not doing to great in moto2

ive had import for 3 years and never put a foot wrong will prob be less of value than UK one though ive never really seen a major difference, not sure about immobiliser codes but i have a cobra fob thing so im maybe can be done to any import 'dont quote me'. you do get folding wing mirrors and the mirrors dip when you reverse..UK dont have this i dont think and of course the uber cool square plate timing chain means should last longer than the car think only other issue would be if it has VDC or TC one has LSD (TC) one doesnt i believe ' dont quote me on this either '

or put the car wheels on full lock thats what i did plenty of room then

and dont over tighten the pin bolt when you put it back to do up the calliper ..it shears if you do

i done mine on the driveway was pretty straight forward read some of the write up guides and familarise yourself before you give it a go

i only used two..but i also fell asleep while doing them so that wasnt ideal, i would reccomend 3 or 4 cans to get them perfect and a thick enough coat on them with about 5 or so coats per wheel

basically you throw the conventional method out the window of building up the layers and try and cover as much as evenly as possible so got to lay it on thick and get tape off when your happy with it..the more it dries it becomes harder..you just have to time it right and peel at an angle and hey presto ive seen people do lines on bonnet and all sorts using this method

its like rubber paint dont know about better, but you can spray it on and peel it off no harm done..normally gives a matte finish but you can make it glossy though makes it harder to peel off then..ive done my wheels,handles, bit of door with it

handles are plastidipped also

plastidipped the bottom of door today as a trial amazed at how straight a line i got

youve got to be grounding yourself out somewhere, you may have to go through all your wires by speedo, stereo, accelerator pedal and just make sure nothings catching or has eroded