Jump to content

The Bounty Bar Kid

Members
  • Posts

    8,234
  • Joined

  • Last visited

Everything posted by The Bounty Bar Kid

  1. £280 and from http://www.incarcamerasystems.co.uk
  2. No, as long as you have a deep 14mm socket or open/ring spanner as the studs are quite long. The central bit of plastic next to the wind screen is friction-fit which means you have to be careful not to damage the tabs on it, so I'd recommend not doing that when it's too cold as all of the plastics get a bit fragile. It's anodized red VHT (or as my missus calls it, "Christmas Bauble Red"). You do base coats in silver, then the red, then clear coat over the top: http://www.ebay.co.u...8871#vi-content Awesome! Cheers dude! Much love, that's the perfect red for my engine bay scheme!
  3. This is the instructions for the smart power unit... Smart Power & Power Magic Pro install We inform the notice for installation of Power Magic & Power Magic Pro. Please refer to the below, once you install it to your vehilcle. <Power Magic & Power Magic Pro installation note> 1. Yellow wire connection If the vehicle has vattery saver, connect the yellow wire BATT(+) to emergency light. (Note 1) 2. Red wire connection please connect after checking that cigar lighter or audio fuse is ACC(+). (Note 2) 3. Multi-booting switch of Power Magic Pro Please install the main body within driver's reach for controlling the switch. 4. Other : Car care during winter season Battery performance is markedly decreased in winter season. Although the Power Magic(Power Magic Pro) normally works, earlier discharge could be occurs according to the vehicle status. Note 1 Battery saver function and Yellow wire Battery Saver is the function for preventing the vehicle's discharge. Vehicles that released recently built-in this function. It turns off automatically all device in vehicle after turning the engine off. Please connect the Yellow wire BATT(+) to emergency light(Do not connect it to taillight and courtesy light) Parking recording can't be executed accoring to the careless installing. Note 2 Audio fuse and Red wire If your vehicle has 2 audio fuses(ACC fuse, BATT fuse) , after checing that cigar lighter or audio fuse is ACC(+) then connect the red wire(ACC(+)) of Power Magic. In case the red wire is connected to wrong places, timer function does not work and multi-booting switch does not work as well.
  4. So I bought one of these the other day... Just need to wire it in permanently. It comes with a low battery cut out unit, which has three wires. One +12v, one -12v and then one Acc. Where are the easiest places that I should connect these three wires? The unit let's my camera be powered even when the car is turned on, but prevents battery drainage. Oh BTW the camera will be mounted on the front windscreen. Thanx chaps and chapesses!
  5. When I meet a girl for the first time, I shake hands with my left. I don't want to intimidate her with the competition right away.
  6. You do realise that I'm the original poster? Women never get in my car.
  7. They go round and round. Round and round. The wheels on the car go round and round. All day long!
  8. I bloody hope so, :-0 Not had chance to check as I can't find my spare heater control.. But if not its a standard rocker switch so you can buy loads of different housing set ups from most electrical places.. Bit of trimming with a knife and bobs your uncle I'd be interested to know too.
  9. Could do. Just wanted to make sure I don't ruin anything by removing something that should belong there.
  10. Oh. Trying to find somewhere suitable to put my new camera. Initially hidden behind the rear view mirror was my idea, but the spots get in the way. It's either there or just behind the gauge pods at the bottom of the glass. Unless somewhere could think of somewhere better?
  11. Behind the rear view mirror, on the glass there are loads of black spots. Why?
  12. An explanation of what it is... http://www.youtube.com/watch?v=gfoBCshFs6s&feature=youtube_gdata_player
  13. Must have a look when I finish work.
×
×
  • Create New...