terribleone

I'd be interested in black nuts (16 of 12x1.25), plus a set of 4 black locking nuts. This works out to £73.95 plus postage on your eBay prices. This seems a tad pricey for a set of nuts which are 'new' to the UK market and thus have few user reviews available regarding their longevity and quality. If your boss is interested in promoting the brand you could always suggest to him that you look into setting up a group buy...maybe shift 5 or 10 sets at a discounted price for people to get trying them out??

You've got a good point there...I've always been quite amazed by how light some of these nuts are, and that they're holding on one of the most important parts of your car. Function may get the better over form for me on this one... So, what discounts can you get set up for club members!!?? (S'cuse the cheekiness, it had to be asked )

It's not a groove cut in, it's a little notch that sticks out...doesn't look like they'd be too difficult to get off though!! The ones you've posted up look pretty good, although they're getting near the price of the 5Zigens...and I'm a bit of a brand whore

Hi guys, being the organised type I've put my locking wheel nut key somewhere 'safe' and now completely forgotten where that was!! I'm looking to get some replacement locking wheel nuts and get mine taken off...looking at the price of McGuards led me to looking at getting some coloured lightweight nuts. Then I stumbled across the 5Zigen nuts which contain lockers in the pack too...bonus! http://z-store.co.uk/index.cfm?fuseacti ... entCat=263 My question is, will these fit on standard Rays? Will they stick out too far? Any pics of what other people are using, or would recommend would be appreciated!

You have to drill or cut some bits from the rear of the cover to get it off. Mine's currently reattached using BluTac until I decide if I'm painting it or not

Cheers for the positive comments...never thought such a simple mod would get so much interest!!

Cheers mate...it's really easy to get off, I did a search on here and nobody really mentioned the removal process so just worked it out myself. First remove the two bits of plastic trim to the left and right of the piece you're wrapping, these are just attached with clips so stick your fingers under and pull. Then the two remaining bits of trim still touching the silver cover need to be pulled away from it (ie. just pull them back away from the cover). Finally, the cover simply pops off itself...it does need a good tug to get the clips out, so don't be shy with it. Refitting is simply the reverse, but the two top bits of trim are a bit tricky to relocate...you'll work it out though!

eBay!! I can't recall who it was from, but type it in and just look for the cheapest price for the size you want. Oh and yes it comes on a roll, there are sizes from 300x300mm up to bonnet & roof size.

Very easy mate, it's the first thing I've wrapped and I did it right first time. Just cut the vinyl roughly to size, remove the backing and lay the cover onto the sticky side. Then use a hairdryer to heat the vinyl up (I don't have one around so had the oven on, popping either end in for 5 seconds to soften the vinyl) then smooth out and it takes shape really well. I'm looking around the cabin now to find more things to wrap...I really want to do the bits on the door handles with the window controls on!!

Wow, really like that!! I love white Zeds and also really like the Ings kit. Yours is pulling it off very well chap!! Thought about going black on the door handles?

I'm doing well resisting the moddding bug...had the car 6 months and other than wheel spacers this is my only other mod. There were a few scuffs on the Strut Brace Cover which have been there since I got the car, so bought som 3M DiNoc Carbon Vinyl and wrapped it. Really easy to do and looks great through the rear window. Hope you like the pics: I've been contemplating painting the 'Z' a nice gunmetal colour, but when I was round the olds' house the other day my mum had a sit in the car and said 'Ooh there's Zs everywhere in it!'...I then realised that there are quite a few and then this one wouldn't match!!

Eugh...just watching that made me feel dizzy!! You can only grip on until you pass out!!

Is it meant to actually 'open' up when you push the button? Mine pops up, sometimes needing another push of the button to actually release it...but it always needs me to physically lift the boot 'open'.

7 weeks not driving the Z would save me about £350 in petrol...that'd pay for 2 Falken tyres, 6 months tax and an MOT

Wise words...I'm a complete geek and have a spreadsheet of every expenditure I have going out, what month it goes out and usually an overestimate of how much...so I can see what I have left to play with each month. I think I've allowed £1000/yr for service/consumables on the Z...ie. a service and 4 tyres, plus a few other bits. I'm now under the impression that may be an underestimate, but I'll find that out in due course!!

Do you think that the price is too high for that then? I've been looking for a few weeks now and pricing are ranging, ideally I want less than 60k Miles.. No, not too high...it's about what I'd expect from a dealer for that model/age/miles. It's just I bought private which always helps, 55 plate GT on 36k miles for a similar price...I'm trying to keep it stock and well cared for to aid resale value when I sell. Although the temptation to mod is growing stronger by the day!!

Mine's costing around £600 per month, including petrol/insurance/loan and averaging out annual tax/services/consumable costs. Personally I'd rather condition myself to the expense now in preparation for even pricier cars in the future!! If 2004 models with mileage like the PH link are still going for that price, I don't need to worry about depreciation for a while either!!

Good chance for a thread revival!! I went to JTS today with the MR2OC, one of the guys there parked up and had a mixture of oil & coolant dribbling out from somewhere in the engine...not good!! Came back, picked the Z up from my mate's house and drove it home...took a peek under the car for my cat and there was dribbling from a small hole under the car behind the passenger wheelarch!! It seemed so coincidental so panic set in, I hastily shoved my hand under to find that it was icy cold water. I've had this on a few cars before, but thought I'd check on here that aircon condensation dribbles from that location. Search function brought up this post...crisis over, happy days!!

Exactly, I've counted out the idea of a bodykit and induction kit because I want to keep the car as stock as possible....what was I thinking of chucking an import rear on!! Although I do have an exhaust in mind for my next purchase...the stock one just doesn't clean up enough!

Cheers guys...I was thinking of taking pics of it with the UK bumper and the damage which I could use at point of sale, but I think i'd rather keep it genuine with a UK spec bumper like you say. There's one on ebay: clicky It doesn't say the exact paint colour, plus I think £100 plus postage is a bit steep? I'll send some PMs as advised

Hi all, There's a big chip on the top of my rear bumper where the previous owner has shut the boot on something...it's bugging me now and I've tried to use some touch up paint from Paints4u which seems to come out the wrong colour even though it's KY0. There's a silver import bumper on eBay going for a good price, but I'm wondering how easily it will fit...are there different mounting points between UK and Jap? and would I have to get a different number plate light unit?? I'd be interested in any advice!

dcash5, you have email!

Cheers for the compliment chap...my reaction to the saftey car was 'WTF is that!!??'... ...I still have no idea what it was!!

Cheers mate, glad you like! If you PM me your email address, I can send higher res ones over...do you want them unedited or just higher res ones of what's on my post? I just did a bit of playing with bright/contrast/levels. Your car is stunning btw...made me wanna sell my silver one and go blue!!

I think I passed you guys on the M4, I was passenger in my old MR2 in the MR2OC convoy and passed a lot of Zeds! Anyway, I thought I'd post up some pics here too...enjoy! Sun coming up on the way down, always a good sign!! Chieveley services, nice looking Skyline: Some convoy pics from Chievely to Chippenham: Then the queue kicked in!! Took the opportunity to take some random pics: Then we finally got moving again; Finally, some track action...absolutely BEAUTIFUL weather!! And finally, what we all wanted to see...drift battle!! :th: