BulletMagnet

Click on the Craigslist annotation

Loved Elite on the Amiga. Any Early Access to the Alpha or do we have to wait?

Pretty good ad, lol

Volk GT-F in 19" http://www.nengun.co...volk-racing-gtf

I can help with german

Multicolour LEDs on a rapid colour cycle gives you 113hp extra, so nerrrr

Might have to change his name to goingnowhereboy

High power wide angle dispersement LEDs prolly, I mean who in this day and age still uses neons or cold cathodes

AFAIK, they are replacements

All comes down to how "friendly" your MOT tester is. Got a JDM bumper on my UK GT that hasn't got the washers, MOT tester just said "You still got the original bumper at home, right?" "Yeah" "No worries then"

Usually, there is a fuse on the permanent feed on the HU harness behind the HU (white plastic thing, opens bajonet style)

Ah, tell a lie, I did have some

Yeah, Chilli Red has the Do-Luck kit complete with vinyls, but I don't have a pic of it

There are usually two 12v wires going to the HU, one permanent and one on ignition. permanent feed usually for power to retain memory. May be as simple as switching the two power feeds around

Richmillions had his stereo wired "live" not just the amp which made it possible to turn on the steroe without ignition. If you only have the amp wired live, and still have normally wired stereo, then you won't be able to turn on stereo without ignition, but it will still drain your battery. Best thing to do is to check whether the blue "Remote On" wire to the amp is wired correctly to the headunit or at all wired to anything. This blue wire (or whichever colour the installer chose) is the only thing that will turn on the amp, because the main power feed will always be wired to the battery directly. Time to start tracing wires I think

HR or DE, should be the same, you'll just have to imagine different headlights and hump bonnet.... (This is with the matching Do-Luck front bumper)

Now don't get me wrong and you can do as you please, but replacing a "scratched" piece of trim at £86 per side, for which essentially is just a small piece of plastic sounds very uneconomical to me. I'd rather spend less than £20 on primer, gloss black and clear lacquer, take my time and DIY it. Just my opinion tho, if you got cash to burn then it's fair play

You can tell by just looking at the picture? Good eye

Don't just look at the pretty pictures, read the bits before, which tells you what offset was used to get the look. If ET20 isn't listed, then it prolly hasn't been done or tried.

PCD is NOT wheel diameter x wheel width.

You could add strobes and stuff, lol

I'd either paint them gloss black or wrap them. I wrapped mine on the 350Z

It's possibly Karma intervening and saving you from the K1

Instead of neons, you could fit multicolor LED lightstrips instead

Or remove them carefully and respray them yourself