GT4 Zed

These side mount seat rails are to install bucket race seats mate not OEM seats. They stand lower than OEM off course and can move the seat forwards and backwards manually. You can adjust the height of your seat but not on the fly as you have to detach the seat from the side mount and reinstall it at a higher point. There are three level available so you can make install it level or slight tipping backwarks or forwards. Hope this clarifies things and sorry if i am wrong and you do have or intend to run race seats

Happy birthday young blood

£ 200 pick up £250 del How cheap can this be before i can get it off my living room

TTT Further reduced. need to get these out of the garage Offers accepted

TTT . Reduced to clear. offers accepted. Must clear garage

Hi mate I got some pics and will try to get them up from PB. What do you need to know exactly? The steering secures to centre spline with a large 19mm nut. You will need a hub adapter at least and a quick release if you plan to run bucket seats.

yes Chris. I'm milltek'ed up and can hear again hence the stereo/ nav. Wales will never be the same again. @ aftershox. Thanks will take your advice. Will try to refit after I get my volume issue sorted.

£150 pick up now. Dont want this to gather dust in my garage .

£90

Looking for the fascia or trim panel to fit my poineer double Din sat-nav. I am not 100% happy with the trim i have which looks OEM but the fitting is not perfect and hoping someone would have a recommendation. The HU is the AVIC D3. Looked at this but want be sure this is what i need before i pull the trigger. http://incartec.co.uk/Pages/Product.aspx?P=2793 Cheers pips

Not that i'm biased but Kuro is best

good DIY mate. you will notice that those simple looking urethane anti roll bar bushes will improve the roll of the car as it makes the ARB work efficiently rather than loose torsional force by squirming within the OEM soft rubber bushes. Those spindly arm thingy is for the headlights auto levelling. I have been thinking that if it where dismantled maybe the light throw would be improved as its dismal on the zed OEM.

Looking good Dean But agree with Irfan about the pillars. Hope you sort everything out soon. Will be tempted in your wrap service next year if this takes off mate.

Snapped this off eBay 2-3weeks ago but it's a long wait to import the matching passenger side from US or Japan and I'm going to the Ring early October so reluctantly selling these superb rail. I have now got a set of uk sourced matching seat rails for my race buckets though as to be expected required so modification unlike the brides which just bolt on They are used and in good condition and working order. These are the super low rails and would fit any standard FIA approved side mounts seats. I'd like to get the £100 for it including delivery. They cost over £250 new imported I believe.

Congratulations, your baby is gorgeous No car is worth the joy you get from a child or children.

Coming in nicely Jay Slippery slope I'm afraid

Can't see the vids on phone Can someone put a link please

Hi Lexx, I could take this off you as I have seen the car in person and it's in good nick for age. I have let my classic alfa shed go and need a replacement. Pm me your number and I'll try and see what we can work out. To any competition out the bump for a nice chap and a decent shed.

that's more like it sir!! About time you did push that built block What pulley are you on now? So meth and nos to go..... I can't wait The kit I bought though a T trim made 520whp and just under 400lbft torque with a 2.78 pulley and meth only on a forged block! So you will crack 500 easy but may fun out of rev unless you plan to chuck loads of gas at it I met up with (Ray)wizard last week who has a v2 vortech pushing circa 450whp for 2yrs now and only experienced 1 belt snap only, attributed to misalignment of one of the pulleys which he sorted with some washers to line it up. No belt slip or snap since. Infact he has had the same belt since. Look into this

My feelings exactly Doc Yep you'll get dibs on the driver seat if only the PS goes Cheers Ian

Chicken I agree with you. It's perfect with std cats but with decats it's loud and I persevered for best part of 2yrs and now my hearing is gone. Seriously mate look on my FS thread I just sold mine and there was loads of interest so contact them for a quick sale. GLWTS.

Sold

Japspeed mate with bungs included off course as in the close up pic. I also have old gaskets and nuts and bolt but it's not worth reusing rusted bits when you can get these cheap on eBay or at the exhaust fitters. Then hangers have be bent so that the exhaust seats square on the bumper. @vit.olo. I can check shipping to Spain but to be honest I'll prefer UK sale in case anything goes wrong.

Sold

After serving me well it time to sell as I have gone for something more sensible now Still has lots of life left to my surprise. I gave it a quick seeing to with flat wire wheel and then scotch brite. Came up a treat. Also cleaned up the flanges and welds to check for any cracks and to leave a nice surface for gaskets to sit so it's all good. Be warned the K1 with decats is very loud!! I endured this for 2years The plus sides are its very light, flows well and makes children and old people cry Asking £150ono delivered. Hope it goes to a good home as I would miss it