GT4 Zed

Rich(RTbiscuit) also make these in vinyl and many other including custom design for a good price too see linky: viewtopic.php?f=32&t=20459

Husky has some finichi's but is so lazy to post it up for sale They have deep dish both front and rear

Front left....... looking at the car or while in it? It is a good idea to follow and keep an eye on all powersteering and oil level. The powersteering cooler connectors has a tendercy to weep/leak everso slightly but not enough to do anything about it I changed the fluid completely a few months ago and the level is unchanged and I never had to top-up in one year of ownership! There is a very small oil patch on the engine cover below and slight weep around the hose connector to the powersteering cooler again though which i had cleaned when i did the fluid change You may be having the same issue

It will fit and you need pads Take the opportunity to put braided brake lines eg HEL and uprated brake fluid eg Motul RBF 600 and definately buy decent pads CS can sort this all for you

Sorry but still not shinny enough

tut tut tut parking in disabled bay is not on Techart are top porsche tuners though saw there test 450-500BHP cayman in the Ring last may and it was a 911 killer

That will be ace Alex what kit do you have? Is it made for the zed off the self? It could be it I put a patent on it. with you everything is possible in the serch for performance

That will be ace Alex what kit do you have? Is it made for the zed off the self?

No they are same size as brembo but two peice PF or DBA only make the front kits but Stoptech do front and rear oem-size 2 piece items like these

Zedfest should be fine will look in my diary and give you confirmation Lee just noticed Zedfest is 20th - 22nd August That is too far mate Any other meet before then? Or i may just drive to you and swap . Where are you based exactly?

Comming along nicely Ian So from what i gather you will be fitting everything apart from the injectors and stage 0 kit Why so? Its not particularly difficult and ......................if Dave could install a stage i kit(apart from using jubilee clips ) then you can This is just on step after taking the plenum collector before fitting the Cosworth Will save you downtime and money me thinks keep the build pics comming

It is easy to do a BCDK DIY with stuff from halfords but it will not do the job as you need the end connector cone peice to cover wider surface area. See below I looked into this and the hard part is getting the hose to connect to near the brake disk. That's why i spoke to RJN because theirs has the collecting duct at the front bumper and a funnel-shaped cone at he brake end of the hose to dissipate the heat unlike the stillen kit. Bennet, do you have any more pics of the disk end of the connection? No, these were all from Stillen's site Other examples below: example of SS cone at the left of pic Double ducts 5zigen 350z cooling duct(for oem size disc) Nice

Would do a swap at a meet(Wales?) Pm sent

I can't believe it My medicine-man told me i was guaranteed to win Looks like coercion pays.........................................Andlid

I have been looking to get a 350z specific brake cooling duct kit for some time now and just mentioned it to the lads at RJN Nissan while snooping for something else They used to have these as an off-the-shelf part but since their focus is on the 370z now may be made on order as thre might be any left? They would favour a group buy obviously and this will significantly reduce cost per item;) See the Stillen BCDK for illustration only(This costs about £150) I will be speaking to the right man(neil or Rob) on Tuesday as he is involved in racing around the country this long weekend . Should be able to get prices, ease of DIY etc then . Stick your name below if you are interested: 1. GT4 Zed

My other half and i have voted for the.................................. green goblin Sorry ol' chap Dave you are tooooooooooooooo far behind now

Start saving Chris

Shame about the incident Gav but it will polish out easy I always knew rosser can drive On a serious note the damage is minimal and i reckon the fixing at the side of the bumper have moved/bent or pop out and will be sorted easily. looks like the chip is just partial thickness and some filling and paintig will give you a nice shinny result with all stone chips sorted However i suspect because you are using the insurance they will just swap the bumper for a new one

Happy birthday ol' chap

Thanks James for tidying this thread again

Lovely motor The carbon fang cover is lush

Thanks James for cleaning this up again

i do now and Gav has approved it