andlid

Hey, anyone here used carbotech pads for the Z / Brembo's?

on your avatar!

Welcome!

paid 80€ myself once, cheaper when you get tires/tyres there too. Then again tyres are 20% more expensive then elsewhere.

viewtopic.php?f=9&t=40453&start=15

I asked first for Sure!

ME....

bet you'll go now even if the wheels are hanging off her...so you should you just got tut-tut-tut'd

Not sticking to their diet.....just not eating much crap. If i get more involved later down the line then i might give it a go. I shall make you your own special vid matey cant wait! 7lbs with the starting weight of you is pretty good specially if you dont stick to their diet, having looked at their vids and the diet stuff I've got to say fairplay for keeping it up...

you sticking to their diet too? no more vids?

Seems vaguely plausible, and yet I've never seen anything short of F1/LMS cars supplying cool air to both sides of this disc. GOing to have a look at some of the time attack cars on the 26th.

researched this a bit this morning and last night, firstly some people on the know says it's not a good idea to blow cold air on only one side of the disc due to the running risc of warping the disc... any thoughts? I was playing with the idea to push cold air down the top of the brembo calipers, this can't be done on my setup (and guess most other peoples setup) due to the tight distance between wheel and top of caliper. Considering running a seperate hose and point it towards the caliper though. I'll be using half the distance piping and get a funel type entry to force more air down the tube and use twice the piping and doubling the airflow (hopefully), thinking on doing something quick for the rears too. A little aluminium braket should be sufficient on the brake side and cable ties ftw attaching the hoses to under that car. Got my first little goodie today: ^ is to 'prove' if it's keeping the brakes colder...or just a placibo

I'll take that pending shipment to ireland, pm on route.

dont bother with the discs mate

how old are the bilstein coilovers? (and miles) < what figure do u have in mind? Would u trade for normal 17" OEM's for the Advan's? tried looking at your front lights (have jdm ones myself) but can't see any of your stuff on your progress thread anymore since you've edited it down.

700 Get ebc brake pads 4 corners yellow or get brembo's some bargain ones going on fleebay. All you need to upgrade would be 4 bolts rear and a bolt cutter to cut down the rear brake shield to fit the new bigger disc.

updated! great stuff

hello

thats a good one or he got a stroke doing his training regime! Go on Nurrish how much you get from webuyanything..

defriending in progress on fb... man you deffo keep suprising me! Have you thought this through properly? All the best with the new car mate, I'm going out to hear my 3.5L V6 purr...

or maybe the first dude to replicate this to their car might just stick up a picture how to step guide for dummies?

http://www.youtube.com/watch?v=VA4OA4D0xaE