I think its a Nokia fit, but most peeps get a standard Nissan part, a bluetooth adaptor, £95 or so on ebay from Holdforth, a NIssan dealer.
will pair with any bluetooth phone and get your steering wheel buttons working
Yup. Its easy though, only 3 bolts on each side along the top of the light
To remove the connectors turn them 1/4-1/2 turn and it should just come out.
Assuming you used my guide, I cant see how you can get it wrong
http://www.350z-uk.com/forum/viewtopic ... indicators
sounds like he had problems getting the cables out of the brake light chris, they are tight
Yep - thought they were glued in at first - replaced now tho
I'm trying to change both Stop/Tail - for an LED equivalent I got from OZ.
(Trying to work out how to remove the light grey 'plug' from the back of the light unit
AND
Swap the indicators out too
I think my arm would end up staying there if I pushed hard enough to reach it.
What about removing the brakelight? is it just a very firm twist? or a bit of leverage somewhere?
I'm obviously not cut out for this.
I set out today to
1) Change my 04 Stop/Tail for a T20 LED
2) Change the Indicators for the SIlvatec Chrome indicators that a lot of you use
Rear lights off - no problem - even in the teeming rain.
I followed the instructions in the guide section on here to find that there is no way I could get my arm far enough down to change the Indicators.
And I can't work out how to get the Stop/Tail light out of the housing for fear of breaking something. Any ideas anyone?
I lost most of the gear on the driver side. Ended up with just about new everything. Exhaust, Cat, and all bits suspension wise. Insurance ended up paying £8800 if I remember. I never was sure how much was really needed and how much was the 'Approved repairer' taking the Insurance co to the cleaners.
But luckily... both wheels kept air enough for me to get to work....
Well - I'd be alloy-ing if I said thats not wot wheely happened!!
That and the rear. and thats what happens if RAYS meet 4 bricks still joined together at 70
Thats the general idea - damage removal . I must post up the piccy of a wheel i 'scraped' against a block of rubble at 70 mph on the middle lane of the M4 near Reading earlier this year. 5:30 in the morning. That woke me up! But if you have a look at the pic posted above by Ebized, thats the sort of damage I assume he was trying to get rid of - successfully.
Anyone recommend a mobile wheel refurbisher who will come out to the Berks/ Surrey/ Hants borders.
I was poking around yesterday and saw someone refer to a guy who had a van and a spray booth (in it?) but bu88ered if I can find it again today!!!
Yes, but on initial approach, although they had been signed for they didnt know anything about them.
Absolutely denied it...
And they signed for them using my name, not their own !!!!!!!!!!!!
wombats...
Yep - will be taking my time over that....
Look forward to seeing these wheels once they have under gne a tad of a change, a nice set of wheels bud
I'd like to echo thanks to ESR for the support too !