jameskaye22 Posted November 13, 2014 Posted November 13, 2014 Ok guys I might get slated for this but I have a opportunity to get a set of work emotions CR-KAI's for a good price only thing is they are 10.5j et 22 and et 15, now ive had the tape measure out and used a offset calculator to work out clearance and fitment and they technically fit but im not sure if they will look right, cant find a picture of similar fitment anywhere and would love to see how they fit and what sort of clearance I will have as im lowered on 30mm springs and arch rolling isn't a problem just is this even worth thinking about??? let the trolling commence Quote
Grundy Posted November 13, 2014 Posted November 13, 2014 Why would we troll? I wouldn't worry too much... I've got 9.5J on the front with +15 offset 11J Rear on +8 Offset. But we got them on there after a fair bit of work. I'm not lowered, rears rubbed untill the arches were rolled. Quote
KyleR Posted November 13, 2014 Posted November 13, 2014 Roll the arches and fit the et15's to the rear, et22 to the front with appropriate tyres and you'll be fine Quote
pjf1985 Posted November 13, 2014 Posted November 13, 2014 They'll fit fine with an arch roll, just Brembo clearance could cause an issue. They will look awesome on a Zed! Quote
Ian Posted November 13, 2014 Posted November 13, 2014 Ive 9.5/10.5 et 15 & they fit fine. Nowhere near crazy Quote
AliveBoy Posted November 13, 2014 Posted November 13, 2014 http://www.rimtuck.com/ Use that. LOWER YOUR CAR GRUNDY It's SO nearly there! Oh yeah, and get an engine too 3 Quote
pjf1985 Posted November 13, 2014 Posted November 13, 2014 Ive 9.5/10.5 et 15 & they fit fine. Nowhere near crazy I have this fitment too and there is no modifying required. Its just the front you will need to get an arch roll unless you're lowered. Quote
jameskaye22 Posted November 13, 2014 Author Posted November 13, 2014 Thanks for the replys guys I ment the crazy thing as A square set up is not the normal done thing and personally 10.5 on the front is a bit much lol Quote
docwra Posted November 13, 2014 Posted November 13, 2014 10.5 on the front is a bit much lol NEVARRR!!! Quote
jameskaye22 Posted November 13, 2014 Author Posted November 13, 2014 Seriously thanks for the advice guys Quote
Desey Posted November 13, 2014 Posted November 13, 2014 i run et12 front and rear, 9.5j and 10j, not a problem unless you lower your car, but then all you have to do is roll arches and camber a tiny bit Quote
KyleR Posted November 14, 2014 Posted November 14, 2014 Thanks for the replys guys I ment the crazy thing as A square set up is not the normal done thing and personally 10.5 on the front is a bit much lol Standard alloys are a square setup, 8" all round. It's the tyre sizes that matter more in terms of traction control etc. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.