03-06 Canards for OEM front bumper

[Andyhut]

Have you got any pics of them offered up to a bumper?

[Grundy]

I'll grab a set of carbon off you on the 24th.

[Tarmac@TarmacSportz]

 

No fitted pics yet, I have a volunteer though

[bc1987]

I think you have plenty of volunteers

[Desey]

oh for god's sake. there goes my business plan :cry:

 

fair play though probably be better than mine!

[Payco]

Waiting to see some test pictures before making the decision. Come on, come on...

 

 

[Grundy]

Waiting to see some test pictures before making the decision. Come on, come on...

I'll be ordering a set friday

[Payco]

Grundy, photos the following weekend then please mate with your experience of fitting them etc. You can be the forum guinea pig...

[evilscorp]

Waiting for mine to arrive, bumper is off and will fit gt lip this week along with the carbon canards. Will post pics when done.

[bc1987]

Have I missed something. Where can I order these?

[Tarmac@TarmacSportz]

I will have 5 of each to order from next week all being well bud

[Hell presidente]

I will take a set of the FRP one's.

[evilscorp]

Tiger seal has arrived, but going to use double sided tape to check positioning for best look/function. Have taken a few photos of the bumper off with the new lip and canards but will offer it up to the car so people can get an idea. Excuse the old tiger seal on the oem bumper lip there was a carbon cover on it before which is now destined for the bin I think.

[Grundy]

Tiger seal has arrived, but going to use double sided tape to check positioning for best look/function. Have taken a few photos of the bumper off with the new lip and canards but will offer it up to the car so people can get an idea. Excuse the old tiger seal on the oem bumper lip there was a carbon cover on it before which is now destined for the bin I think.

Any chance you could upload of a shot of the images you have atm?

[StevoD]

I will have 5 of each to order from next week all being well bud

 

Hope my name's on a set

[pjf1985]

Someone get these on and put pics up!

[Payco]

Grundy's on it like a car bonnet. I'm first in the queue to see the photos fitted !!!!

[evilscorp]

Here are a few, posted the ones with the GT lip and outside the garage on my thread (shameless plug) scream if you want to go faster

[Payco]

What happend to your lower front bumper ?.

[evilscorp]

Was a carbon cover thing for the middle bit the previous owner put on with too much tiger seal. fingers are blistered after removing it with a hair dryer.

 

Here is how much tiger seal I applied for the canards.

spirit gauge was useless

One side went on quite easy, the other was a little tricky, slight different angle on it so took a few attempts and some mole grips to get the angle right.

Note, use lots of masking tape and wait till its rubber like consistency before using your nails or something to push/scrape off any over squidge(cant think of the right term).

excuse the masking tape as its for the lip tomorrow.

[Payco]

Great work, well done.. Looks very good..

 

Thanks

[evilscorp]

Still not 100% finished with the lip and may add some nuts and bolts to hold everything on for peace of mind. But this is how they look in the sun.

[Tarmac@TarmacSportz]

 

Yeah that looks sweet

 

I would defo, use screws on the lip, are you not painting it?

[evilscorp]

No, might use carbon wrap or wait for full Matt wrap.

[Tarmac@TarmacSportz]

 

Ok, I recommend painting them but each to their own. Nice lip that one