Posidrive Posted November 27, 2018 Posted November 27, 2018 Just failed MOT on emissions but surprised that no error code showing. Any ideas what could cause this? Slightly concerned could be related to not being driven for 8 months Quote
Jay84 Posted November 27, 2018 Posted November 27, 2018 Quite possibly a result of not being driven, or the test station not getting it hot enough. If it has sat for a few months, a decent drive will always help. Any advisories for a leak? They can affect the lambda result from pulling in air. It difficult to drive and get hot without an MOT in the first place though. Is it a standard system? 1 Quote
Sim Posted November 27, 2018 Posted November 27, 2018 (edited) As said above, I always get mine properly hot before an MOT as I run HFCs. Edited November 27, 2018 by Sim Quote
Umster Posted November 30, 2018 Posted November 30, 2018 Swap decats to HFC or stock cats. Check for faulty gaskets on the exhaust manifold or in the exhaust system. Try a bottle of cataclean or redex and red line the car a little. Blow the @*!# out the system and get the catalytic convertor back to good condition. Take a nice long drive and stick in the lowest gear possible before heading into the MOT station. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.