30 or 35mm Spacers

[Stuggerz]

Afternoon all,

 

Im not in any urgent need of these. Was just a thought I had whilst suffering from the common zeditus virus.

 

Wondered if anyone has any 30 or 35mm spacers going?

 

Pm me if u have some to shift.

 

Many thanks

 

Stu

[RS8055]

30 or 35mm spacers? Don't you mean 20 or 25mm spacers?

[Stuggerz]

Naa 30mm lol is that to much?

 

Just for the rears.

[MrLee]

I'm due to fit 25mm to the front and 30mm on the back soon!

[RS8055]

Would love to see how that looks Lee... most people fit 20mm fronts and 25mm rears, but it's not unheard of to have 25mm front and 30mm rears.

 

20/25mm sits very flush though

[MrLee]

I'll post pics as soon as they're on. Just waiting for my new nuts (!), threadlock, and then for a mate to come help as I figure I'll need someone to stand on the brakes while I fit the fronts. I still haven't quite worked out whether to just work on the jack (I have the ice hockey puck thing ready to go) or attempt to put the car on axle stands.

[cascade88]

20/25 has never seen anywhere near flush unless you are running positive camber

25/30 still has room but best to roll rear arches.

[Andy_Muxlow]

I have just put 20/25mm spacers on mine and it has brought the wheels out nicely.

 

 

Sent from my iPhone using hammer and chisel!

[mattross1313]

I ran both combinations on my 350. Personally preferred it with the extra 5mm all round

[Y23DRH]

i fitted 40mm rear and 35mm front hub centric spacers not had a problem with them also rolled the rear arches and the car is quite low drives fine.

 

back to the thread, im sure i have some 30 and 35 mm hub centric spacers in the garage,

 

i shall have a dig about and see if i have them still.

[modo]

Use axle stands Mr Lee, don't chance it.

[Adrian@TORQEN]

30mm in stock

[jamez87]

MrLee, I stuck a screw driver in the vents on the front disc and stuck a rag between that and the caliper. Can tighten the front spacers on your own then!

[Stuggerz]

i fitted 40mm rear and 35mm front hub centric spacers not had a problem with them also rolled the rear arches and the car is quite low drives fine.

 

back to the thread, im sure i have some 30 and 35 mm hub centric spacers in the garage,

 

i shall have a dig about and see if i have them still.

 

Legend. if you have pm me.

[Stuggerz]

Tbf would possibly look at 25mm spacers as well.

[RS8055]

MrLee, I stuck a screw driver in the vents on the front disc and stuck a rag between that and the caliper. Can tighten the front spacers on your own then!

 

+1 same here!

[Y23DRH]

i fitted 40mm rear and 35mm front hub centric spacers not had a problem with them also rolled the rear arches and the car is quite low drives fine.

 

back to the thread, im sure i have some 30 and 35 mm hub centric spacers in the garage,

 

i shall have a dig about and see if i have them still.

 

Legend. if you have pm me.

 

sorry for the late reply!

 

i had a look in the garage and i cant seem to find the parts, but i will have another look Saturday afternoon,

 

if i find them i shall send you a message.

[Stuggerz]

i fitted 40mm rear and 35mm front hub centric spacers not had a problem with them also rolled the rear arches and the car is quite low drives fine.

 

back to the thread, im sure i have some 30 and 35 mm hub centric spacers in the garage,

 

i shall have a dig about and see if i have them still.

 

Legend. if you have pm me.

 

sorry for the late reply!

 

i had a look in the garage and i cant seem to find the parts, but i will have another look Saturday afternoon,

 

if i find them i shall send you a message.

 

Thanks Y23DRH

[Brimstoneboy]

Ive got some 25's knocking about, i had em on the back with the standard rays let me know if you dont get sorted out