shire350Z

That's only just out off sheffield wait till you get further in there

Top off the peak looking back at Sheffield bloody hard climb Off back down now

Well had a new SRAM chain and cassette fitted and bought a few spare powerlinks and these few bits arrived in the post today The V8's are in White

Didn't realise try were based before the third one, wondered why Han was alive in it

I'm in the Market for a new chain Chris any advice on which to get?

Very much so Andrew did most off ladybower but missed out on cut gate this time 'the beast' is an experience for anybody no matter how accomplished

Well had a good run out today four hours in the peak and tackled 'the beast off hope cross' you'll have to google it, the bike handed it all well apart from snapping the Chain luckily we had the tool to fix it and my mate had 2 punctures I'll let the pics do the talking

Out in the at half 8 round ladybower I'll try get some pics This is on it's way

Well found a 50mm hope DH in gold for the right money so I'll see how it fairs

Getting some FSA carbon bars which are 660mm so should be ok, I know what your both saying but 110 is way to long so thinking only coming down to 70mm isn't much so not sure, plus really like the 50mm hope DH stem

Did about 20miles yesterday on it and had really bad back ache last night and today think it's because it's a large and I'm having to stretch further forward but its got a 110mm stem on so looking at swapping it for a 50mm one or maybe 70mm can't make my mind up but liking the look off this one

Gave them both a good clean today, bringing one into the fold and letting one go ...... Up into the peak Sunday morning round hope valley and ladybower for some proper riding to test the new bike out The new versus the old Then gave the zed a wash, been spending to much time with the bikes and neglecting the zed

Looking Andy, looks like clumber park that to

Off to see it tomorrow

Looking good Andrew what brakes are you using? Liking the braided lines

No not much, but I'm never happy always have to change bits (like with the zed)!! Half right Andrew quick release seat clamp and a rear skewer wanted a front one to but iv got a 15mm through bolt and the local bike shop says I can't swap that Headset would be nice but bit pricey when mines fine, might treat myself to some new Tyres any recommendations ? Don't know wheather to go to 2.3 or stay with the 2.1's

Great news Andrew, can't wait to get out on my bike this weekend to! Just waiting on a few little new little shiny bits from hope

Great news Andrew, can't wait to get out on my bike this weekend to! Just waiting on a few little new little shiny bits from hope

you should stop off for the peaks just got to learn how to bleed my own brakes now

ill be there

Well here she is a 2009 Marin mount vision quad XC had the brakes serviced and went out for a run today, lovely bike to ride with great suspension will be getting into the peak next week on it XT components Rock Shox team revelation forks 150mm Fox rp23 rear DT swiss wheels hope pro 2 hubs Juicy avid carbon discs

Yeah that does need a little adjustment the bike is a large which I was a little unsure about but I'm going to swap the stem from a 110mm to a 70mm one (in carbon ) And roll the bars back a little see how I get on with it, off to pick it up this morning after the check over

Just picked it up and dropped it off at the local bike shop to give it the once over and bleed the brakes can't wait to get out on it I'll get some pics up tomorrow when I get it back and a spec list Already looking for some carbon bars and stem

Just picked it up and dropped it off at the local bike shop to give it the once over and bleed the brakes can't wait to get out on it I'll get some pics up tomorrow when I get it back and a spec list Already looking for some carbon bars and stem