3FIDDYZ

I would hate it of one came up on ebay for a low reserve Ian!!! FIGHT!!!

Mate, looks fine and I bet the dampers drop nicely into the slots.... But! I would find some type of matt tape to seal the holes with, cause you will get rain / water getting in and those are 2 places in the bay you dont want water getting into as you may get issues.... just a thought!

Hi mate, saw the GT at Snetterton when we were up there last year, lovely car Glad its back on the road. Whats the deal with the cam on the back? Was that a factory fit or an addition? Mark

Oh and it will make your cabin stink of oil... There is no reason for a catch can to be vented! Be a baller and get the Arc / 5Zigen or Cusco one mark... You got a bloody expensive kit and your looking at gypo parts.... (Sorry to anyone that dosnt like to live in the same place for more than a week and is reading this on a borrowed broadband collection....) Still laughing at Alex's comment! Why use loads of words when 1 will do!!

Also are you running test pipes / decats? And what year was the replacement engine? Am sure a few of us can chuck up our dynos when you put yours up... Just take a pic of it with a digi camera rather than a scanner

Looks like Goodwood arnt doing their "Sushi Sunday" breakfast meet this year but they do have the "Souped Up" sunday on the 2nd of Nov. Anyone interested in getting together for an end of season meet? If we can get enough cars we can book a spot so we are all in the same place. Add your names below if you interested. Mark PS you can go and pre register at http://www.goodwood.co.uk/site/content/ ... ation.aspx but I will make contact to book the area.

Guess thats one way of doing it!!!

You cant colour code Teins..... Thats like dying your takata's blue.....

Or call my mate sean @ countdown international http://www.countdowninternational.com/

Just on this, amuse dont recommend that there ECU's are used over here... something to do with the fuel maps that are in their ECU's... It may have come off an import car.... With regards to the engine swap, did they do an ECU replacement? It is low considering what you have but then the stock ECU can also overpower an add on over time if its not fitted right... Where you based? I would recommed taking it too another turner with a dyno like Gary @ GTart and see what they come up with.. Get the dyno up and lets see...

Used the bolt shown with the arrow when I did mine Meant you can just trim the plastic with a stanley knife and refit the covers.. Bonnet does go quite high though.....

To many girls on here already... I mean there is you, cara, m350zb....

If you want the Nismo ones then check out the cost on japanparts.com I think they also do the 2 types of 350Z mats too, ones with the 3 squares and then the ones with the 350z logo. Nismo ones are very plush though As stew says, the ones from the US are LHD so they dont fit as well due to the shape and the drived wouldnt get the extra heal protection!

JP Visage Sides, Nismo lip, not sure about the rear!

Just back! Thanks for the message Darren! Will make sure I get the BT working next time! Zed coped well on the way back till got to a bit of a hill and the TC went on and off!! Oh well hope the snow has gone by March......

Its not in the flesh in the UK and its got a veilside kit on it! Too many of those about and the veilside "slots" have been filled!

Coupe or Vert no matter, infact it would be nice to include a few coupes in my plan!

Amen! High 5!!

A work colleague just called me up and said "dont you slow down or look in your mirror when someone flashes their lights and honks their horn at you when your driving your car? You just sped past me..." as he travelled down the M4.. "Yes" I said, "I normally would but as I am sat at my desk in London then its not me!" So whoever has a 03 GM or Blade with a long nose body kit that was going down the M4 at 9.10 today and was flashed and honked at, my mate Andre sends his apologies

Sorry should have explained myself better!! I was meaning a full body kit, not just a lip. Lots of rusty nismo ones but non with anything different... Must be someone in the UK that has gone against the norm....

JCT? nope. Joint Contracts Tribunal? (I assume you were asking me) Yep, did mean you!! http://www.jctconsultancy.co.uk/home.php

Anyone have one or know of one in the UK? M

As this is now a boats and jobs thread (or a sailors and riggers dating thread...) thought I would post up about both.. Parents have just been boring me about being on this for a few days in sydney... Am in training and development... IanS, do you know JCT?

Am getting 104.6mpg But then I am just adding the numbers I put together in the last 4 "what mpg" posts....