GIXXERUK

possible fluid degraded and overheated worn pads, had a 350 and 370 and they both move forward slightly after the handbrake is applied

" When he he tried to spin the wheel it took a lot of force (without caliper on)" that made me think its not caliper related ? agree about the brake fluid boiled, probably discoloured

Yeah I'm trying to think why I tried twice and had the same thing happened ?

I would just change the pads but check the caliper condition when you do, I'm guessing the resistance is inside the hub so is most likely to do with the handbrake shoes ...... needs stripping and investigating http://www.350z-uk.com/topic/15976-how-to-change-non-brembo-rear-discs-pads/

edited title and may aswell throw this in here To change between selective unlock enabled or disabled (default): Selective Unlock - Enabled When an LOCK signal is transmitted from Intelligent Key, all doors and fuel lid are locked. When an UNLOCK signal is transmitted from Intelligent Key once, driver side door and fuel lid are unlocked. Then, if an UNLOCK signal is transmitted from Intelligent Key again within 60 seconds, all other doors are unlocked. Selective Unlock - Disabled When an LOCK signal is transmitted from Intelligent Key, all doors and fuel lid are locked. When an UNLOCK signal is transmitted from Intelligent Key once, all doors and fuel lid are locked. Enabling/Disabling Selective Unlock When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 5 seconds at the same time, hazard warning lamp blinks and Selective Unlock feature will toggle (enabled -> disabled or disabled -> enabled)

Hi Colin, I plastidipped the fangs and the diffuser, unfortunately it didn't work on the fangs (tried twice) I think it was the heat from the engine that was making it lift, I'm waiting for good weather and I'm going to spray the fangs satin black Hth Paul

Happy Birthday

Sold - thread locked

cracking present all the best Bob

here ya go mate........... The automatic door lock function ON/OFF can be switched by performing the following operation. 1. Close all doors (door switch OFF) 2. Turn ignition switch ON 3. Press and hold the door lock and unlock switch for 5 seconds or more in the lock direction within 20 seconds after turning the ignition switch ON. 4. The switching is complete when the hazard lamp blinks. OFF → ON : 2 blinks ON → OFF : 1 blink

really getting there now, great pics that 991 gt3 is awesome, I was looking at one in ninemeister yesterday

Kenny

^^^^ doubt you could live with it ...as above

Ark

I think you need to start a build thread

not keen on le mans blue looks great congrats

Luke search the 370z sale forum for "370z wheels" as a few sets have sold ( Parello, 370ad) and try ebay for prices,

Stalker

Sold - thread locked

Colin