GIXXERUK

this happened on motorcycles from 2003 but it does make more sense on a bike - be seen be safe etc

just because we mix with fellow minded owners and write about our cars and take pics and go around spotting them and do a daily check on ebay for "350z" and polish and wash them .... oh forget it ..... we need therapy 350z = ocd

what about a memory stick if the hard drive doesnt work ? something like a freecom hard drive might work - it powers via the usb port and is very slim, or a western digital (i have one of these for my laptop) - very slim ! http://www.wdc.com/en/products/Products.asp?DriveID=391

why is everything always down south !! :rant:

we're not anoraks !!! only reason i looked at this thread was because i thought it was for 350z uk anoraks

If there's a fault it reflects on the manufacture/design and not Brinster. How he handles your problem on the other hand will be telling. +1 spot on digsy, the problem is not a refelection on the seller only the way they deal with it

We stopped using rainX once PIAA released their own version, much better, £5.99 bottle Mine beads with just using the wipers themeselves (i.e. the silicone seems to leave behind some which causes the water to bead when the wipers arent in use, very apparent with Amanda's and my car). Will this stuff do much extra? If it does, stick a bottle in my order this will be your order from big phil

pics ! when you get it done mate, did you go for a kenwood ?

i like the way you have the weight saving alloys on there - plastic looking for a beater diesel myself at the mo get it chipped

very i came very close to buying a v6 clio (facelift) before i got the Z Z looks very clean

i have read about nismo's cracking before although this is usually with aftermarket cats fitted and after the car doing donuts !! lack of flex within the system get a replacement, if you dont then name and shame the supplier

swop it with the other side - plug it in and see if it works

I did mine that way but i did take the top bolt out of the headlight, that way you can ease that headlight up slightly to give better access

The bumper doesnt have to come off all the way, if you dont have the water bottles for the headlight washer it maybe possible to do without removing the bumper ? they were in the way when i did mine so i had to undo the bumper and pull it forward but i didnt disconnect the washers http://www.350z-uk.com/forum/download.php?id=2268

http://www.350z-tech.com/zwiki/Category ... lectronics lots of info here

it would look even cleaner with chrome bulbs in the indicators

I use Z2 topped with Z5 on mine, gives a nice lustre

HERE YA GO.......... http://forums.DELETED.com//ind ... =14728&hl=

love the car, love the pics nuff said

http://www.350z-tech.com/zwiki/Blacking ... headlights headlight removal here mate

bumper off to remove the headlight http://www.350z-tech.com/zwiki/Front_Bumper_Removal http://www.350z-tech.com/zwiki/350Z_Headlights download a manual here http://www.350z-tech.com/zwiki/Service

was it cheaper than the nismo?

you can either take the front bumper off or you can access it from wheel arch, undo the wheel arch (front part) and jack the front up a little this will give you a bigger gap between the wheel and the arch, i did mine this way you need to bend the inner lining a bit to get it out of the way but it easily reshapes when you push it back

Lookin good mate, i thought you had the dual pipe jobby, how much did that set you back ? is it a full cat back system ? are the tips polished ?

What do mean - he's taken off all the sunset right back to the primer and just made that shiny i know mmm GM