GIXXERUK

new rs6 is 572bhp out of the box !!

this talks you through removing the headlight http://www.350z-tech.com/zwiki/Blacking ... headlights bumper removal........... http://www.350z-tech.com/zwiki/Front_Bumper_Removal

this is called holograming from what you describe loads of info http://www.detailingworld.co.uk/forum/s ... olograming

you go on two sites ! !

welcome Harold ...........nice pics esp like the rolling shot

+1

shhhhh nothing is free, he paid but not in cash

lookin good and a helluva garage

when you first do it there seems to be a never ending amount of 10mm bolts you can take the bumper off enough to get to what you want and leave the headlight washers connected

you can access the inner arches with 19" wheels by jacking the car up at the front, this increases the wheel - arch gap done it myself and had the bumper off

Azure spotted in Abergele this evening, very clean

no probs, they are an easy fit, prob 15 mins

take the cap off and turn the steering lock to lock. with the engine running, holding it on lock and look for bubbles in the fluid, this will bleed the system of air

check the belt on the power steering and the power steering fluid level

success

What colour car ? 18's or 19's ?

not a lot.... £25 iirc off bigphil Whos big phil? - bigphil is a member on here who runs ESR 07714457051 0191 523 5555 eastshoreracing@btinternet.com

not a lot.... £25 iirc off bigphil

Halfords surface cleaner. I loostened the 1 of the 6 centre bolts at a time cleaning around them with a brush. Disconnected the air intake and all the rest of the lines etc... Plenty of masking tape and news paper to avoid overspray. Didn`t require any primer so it was quik to do. My plenum is sat in my garage at the moment so I think this may be a project for next week it would be rude not to ooh top gear is on ------------>

nice car, good price, good luck with the sale

nice work, i like subtle mods, well mods that should have been oem

I've got the same engine cover, funkystyling iirc might do my plenum now

used the same stuff before, gives a matt grey/black finish

nice work did you spray or paint the plenum ? did you use high temp engine paint ? lookin good

R32 - the seats are the noise is and the build is very comfortable and easy to drive with good residuals