captint

No I will have a permanent stock of these.So anytimes ok by me Cheers Marc

Whats the black finish at te moment?

What boost were you running and could you translate that into BHP

Hmmmmm, whats happening with the UTEC group buy, that would make this a worth while trip

Yeah I got mine from there too, but it took 8 days and cost £115 after tax and clearance Worth it though

Not too sure myself

Whats the correct rear offset?

Can you get them with a non red rim?

30K now, will get a run around in Feb when I go FI, thinking of keeping the Z as a long termer, now that I'm getting old.

Mate, got to take my hat off to you, great job. Well done, you have certainly set the benchmark

Well done in your standard z:)

I have the MPS and I'm not that impressed, will be changing to toyos when the time comes

DC sports do a very nice header exhaust combo not too pricy fitted ABP are a dealer

Wilkommen, good luck and great persiverance

I'll get some rear end ones taken

It was today!!! Date on the camera is wrong Then happy birthday for yesterday now

Ok so a quick run down for you, the Tonneau cover fits from behind the drivers seat into the gap where the strut brace is, this is the same positioning as the Nissan one. This means that the cover is totally flush with the strut brace sectioning off your two storage compartments. It is held in place by friction, there are velcro sticky's in a ziplock bag that come with it, but you don't need them. The logo does not have to be added, it's down to purchaser preference, the logos are free when purchasing the unit and you can ask to have then attached or not. The board was cut using a professional laser guided saw (sounds more bond than it is), this process was undertaken due to the complex nature if the shape. It would have been easier to do it from the boot side of the strut brace, but the end result was no way near as effective. The board is covered in accoustic foam that does reduce road noice and this is the covered in acoustic carpet to assist this process. the unit is nice and soft to the touch. The board is solid enough to take knocks from items you may be carrying in the boot, without causing any damage. The unit does look fantastic when installed, this process takes around 10 seconds and really makes difference to the interior. If you are interested PM me, £44.00 per unit including logos and stickys, packed for shipping. Also please remember that the deivery is included (collections and drop offs in local vicinity not a issue, but do not recieve any further discount as delivery is free), so please use you daytime address, ie office. Paypal, cheques and cash accepted. Cheers Marc

Ok so a quick run down for you, the Tonneau cover fits from behind the drivers seat into the gap where the strut brace is, this is the same positioning as the Nissan one. This means that the cover is totally flush with the strut brace sectioning off your two storage compartments. It is held in place by friction, there are velcro sticky's in a ziplock bag that come with it, but you don't need them. The logo does not have to be added, it's down to purchaser preference, the logos are free when purchasing the unit and you can ask to have then attached or not. The board was cut using a professional laser guided saw (sounds more bond than it is), this process was undertaken due to the complex nature if the shape. It would have been easier to do it from the boot side of the strut brace, but the end result was no way near as effective. The board is covered in accoustic foam that does reduce road noice and this is the covered in acoustic carpet to assist this process. the unit is nice and soft to the touch. The board is solid enough to take knocks from items you may be carrying in the boot, without causing any damage. The unit does look fantastic when installed, this process takes around 10 seconds and really makes difference to the interior. If you are interested PM me, £44.00 per unit including logos and stickys, packed for shipping. Also please remember that the deivery is included (collections and drop offs in local vicinity not a issue, but do not recieve any further discount as delivery is free), so please use you daytime address, ie office. Paypal, cheques and cash accepted. Cheers Marc

PPS Before anyone says anything, I know my cars a mess, I was meant to clean it for the Reading meet but ran out of time

Oh and I will take some better photos as it was a tad dark. If you want any opinions Mugwump has one installed

Ok so a quick run down for you, the Tonneau cover fits from behind the drivers seat into the gap where the strut brace is, this is the same positioning as the Nissan one. This means that the cover is totally flush with the strut brace sectioning off your two storage compartments. It is held in place by friction, there are velcro sticky's in a ziplock bag that come with it, but you don't need them. The logo does not have to be added, it's down to purchaser preference, the logos are free when purchasing the unit and you can ask to have then attached or not. The board was cut using a professional laser guided saw (sounds more bond than it is), this process was undertaken due to the complex nature if the shape. It would have been easier to do it from the boot side of the strut brace, but the end result was no way near as effective. The board is covered in accoustic foam that does reduce road noice and this is the covered in acoustic carpet to assist this process. the unit is nice and soft to the touch. The board is solid enough to take knocks from items you may be carrying in the boot, without causing any damage. The unit does look fantastic when installed, this process takes around 10 seconds and really makes difference to the interior. If you are interested PM me, £44.00 per unit including logos and stickys, packed for shipping. Also please remember that the deivery is included (collections and drop offs in local vicinity not a issue, but do not recieve any further discount as delivery is free), so please use you daytime address, ie office. Paypal, cheques and cash accepted. Cheers Marc

Time to extinguish that fire photos below

Good call, seriously I was fooking cold by the end off it

And sh1t was it cold, I was bloody freezing, good to meet everyone again, sorry we shot off Rob, but hyperthermia was about to set in

No problem Mugwump, cheers for the ticket and manual, the dark side beckons