Coz@TORQEN

Don't forget to let us know if you had your eye on something which isn't included in the sale! Will try to work some magic and see if we can help at all Excluding OEM parts as our margins aren't great on them.

Hi Guys, Just a funny little product release which I thought I'd share on here, couldn't believe it when I saw it Introducing..... The HKS x Zippo Lighters https://www.torqen.uk/extra/merchandise/249016-hks-zippo-lighter.html One sold already

Hi Guys, We have our new batch of spacers which have had a revamp with a list of improvements, now including cooling channels and removal grooves as well as a knurled design. More details below. Features: • CNC Machined - 0.02mm tolerance precision - perfect mounting • Active cooling technique - symmetrical petal shape grooves for effective heat dissipation and water / debris protection • Knurling design - reduce internal stress and enhanced heat dissipation • Full-cone seat - greater force area and safer design • Hub centric - eliminates the vibration and transfers bolt load • Removal grooves - makes it a lot easier to remove the spacers, but also improves air cooling • Forged AL7075-T6 with Tensile Strength ≥ 572 Mpa • ISO Grade 10 Nuts with BONOSS Engraved, Strength ≥ 1110 Mpa • ISO Grade 12.9 Studs, Strength ≥ 1220 Mpa - higher grade than the OEM studs at 10.9 • Over 66 SGS TÜV Test Reports Certificated • 10 Years Warranty The price is for a pair (2 pcs) wheel spacer, including the required applications(Bolts/Lug Nuts, etc).

https://www.torqen.uk/content/11-recommended-garages

Hello and welcome to the forum!

Welcome to the forum! Look forward to seeing your new Z once you've got it

More brands and products added 5% off ISR Performance 5% off ARMASPEED Intakes 15% off 350z NSM Side Skirts (in stock, ready to go) 5% off BC Racing Coilovers 5% off STILLEN 5% off Eventuri Intakes

Hello and welcome!

There's no aftermarket version of the brace you linked the photo of. Other than the ones you've already replaced, Ultra Racing only really do other aftermarket braces which aren't OE replacements. Member Stays / Kidney Brackets are likely to need changing if you haven't done so already, OEM is the only option for those. If you're trying to freshen everything up, this one also tends to be rusty, it goes between the fuel tank, some people just remove them as they aren't deemed structural: https://www.torqen.uk/nissan/350z/suspension-steering/braces/12520-350z-nissan-oem-board-assembly-rear-floor.html

That's about right, £300-500 or so for the panel and then the rest for dismantling/mantling costs and blending to the rest of the surrounding panels.

Hi Nick, These are the ones for the V3 350z bumper which we usually recommend: https://www.torqen.uk/nissan/350z/body-styling/exterior/12567-350z-zsp-aluminum-front-extension-diffuser-panel-for-nismo-v3-bumper-fascia.html None in stock currently, we have around 5 on backorder.

Few new additions: -Leg Sport: 5% Off -TORQEN Resonated Short Tails: 10% Off (All tip options included in the sale) -TORQEN V2 Modular Y Pipes for 350z/370z: 15% off pre-orders

Hello and welcome!

We can supply brand new OEM or an aftermarket Carbon Fiber bonnet if you cannot be bothered with paint.

We'd recommend the JWT clutch paired with the LUK DMF, you can also select the TORQEN heavy duty CSC from the drop downs. Wouldn't go for the OEM CSC again as they are a very common failure point and you might find yourself dropping the box again sooner than you expected. https://www.torqen.uk/nissan/350z/powertrain/clutch-flywheel-packs/245694-350z-hr-z33-370z-z34-jwt-clutch-with-luk-dual-mass-flywheel.html I know you PM'd me too, I thought I'd pop it in here so the information and link is out there for others too ❤️

This is our best selling oil to give you an idea: https://www.torqen.uk/nissan/370z/engine/belts-pulleys-oil/12285-350z-z33-370z-z34-motul-8100-5w30-eco-nergy-synthetic-engine-oil-5-liter.html

If it's the right viscosity and has the Nissan approval, you'll be fine. That being said, the majority of people run Motul on these.

Loads of people upgrade to the DEPO or Spyder lights, I'm sure someone here must have a spare set willing to part with just one side. Failing this, we can help with an aftermarket set.

We're going to install this to it, it's the last step in our Boeing 787 Dreamliner conversion.

Nah, they did do some extensive testing at Heathrow runway 21L though....

Hi Guys, This ones going to stir up some controversy, we have a HUGE chassis mount Tarmac Sportz wing for sale, it will include the pre-cut 2015+ Nismo rear bumper which is painted in white. Package includes: -370z Tarmac Sportz Chassis Mount Rear Wing -370z NISMO Genuine OEM Rear Bumper - Cut to fit the Chassis Mounting Point - White The RRP on the wing is £1200, the rear bumper is £725 and that doesn't include paint. We are looking for £1200 all in as a package for both, shipped.

Hey Guys, We have this Maxton design kit which includes the rear spoiler, side skirt extensions and rear spats. It is made for MK2 Nismo (2015+) - Unfortunately one side skirt extension (passenger side) has a chunk missing, please see photos. The kit RRP from Maxton with delivery is £427 including delivery, we are looking for £225 delivered.

Hello and welcome!

350z Zorst is now 15% off and in stock: https://www.torqen.uk/nissan/350z/exhausts/exhaust-systems/76093-350z-z33-torqen-zorst-cat-back-stainless-steel-exhaust-system-trq-35zorst.html

Welcome back