Jakeswheelbarrow

Next job is to paint the plenum gloss black!

Fitted this afternoon. Above 3,000rpm makes a lovely induction noise. Defo makes the engine sound better in my opinion

Current discs beginning to get the wobbles I'm afraid Sent from my XT1039 using Tapatalk Brake discs dont warp or wobble. Its either suspension bushes or deposits on the face of the disc which can be skimmed off. Seriously, Ive driven plenty cars with mega big brake packages and the standard brembos teamed up with high quality pads are up with anything, Im sure Ive had the back wheels off the ground My Discs were worn too. Ebc make their own direct replacements. Not grooved, standard size and fit. But made with higher quality materials, and painted with their anti corrosion finish. They arrive black but the mating face goes shiny once beded in.

Looks amazing! Great job

EBC oem discs with red stuff pads, love them

My pop charger is getting delivered this week can't wait! Hopefully will make my milltek exhaust sing a bit louder too!

My house was built in 94. Getting through the door is the scary part. Once it's through its fine. I drive nose first into it and use the wing mirrors (one inch each side) to make sure it's central. Crawled it in the first few times, much easier with practise

Paul K, on 10 December 2015 - 15:05, said: 1. 370Ad - Stand Pass + Track Time - PAID 2. MrsNiki - Stand Pass only - PAID 3. Rickdon - Stand Pass maybe track time 4. Stuggerz - Stand Pass only 5. Valy - Stand Pass - PAID 6. glrnet -Stand Pass 7. Ogman - Stand Pass + Track Time (as it's my birthday) 8. Chippychip123- Stand Pass 9. Ozzy225 - Stand Pass + Track time 10. Shezza - Stand Pass 11. Roobies8 - Stand Pass only 12. AdamTSmith350 - Stand Pass only 13. Garygranite - Stand Pass 14. Chizzz - Stand Pass 15. Tea and Wax - Stand pass 16. SherlockH -Stand Pass & Track Time 17. Paul K - Stand Pass - PAID 18. Dean_m Stand Pass only 19. SYY - stand pass & track time (I think, do we book our own tickets and track slot) 20. Wendy - Stand Pass 21. WINKJ - Stand Pass 22. Lloydshaw - Stand Pass 23. Condor109 - Stand Pass 24. harryjackson - Stand Pass & (maybe) Track Time 25. Beagle - Stand Pass & (maybe) track time 26. Has - Stand Pass 27. crute/higgins350z - stand 28. GreenLandy - stand & track 29. choptop - Stand Pass 30. Rich260- stand pass& track time 31. Shire350z - stand pass 32. Justthejedi - stand pass 33. AmyZed - stand pass 34. Kraziekatz1 - stand pass & Track (whaa hoo.....get ready everyone ) 35. Jakeswheelbarrow - stand pass

Replaced mine last month. Bought EBC discs with red stuff pads. Their discs come in black as they have the new anti corrosion coating, but once bedded in the mating faces turns polished like normal. Not too pricey and have made a massive difference. Highly recommended!

Only problem was I now have the flashing airbag light.... But hopefully will be a lose connector underneath the seat like other topics have suggested. This is the best forum I've ever been a part of!

Unfortunately the discount was only for me as it was a friend who got it for me. Just finished a 300 mile trip this weekend. Exhaust is now sounding perfect! Has got a little bit louder and is nice a bassy. Now pops on run down and revving (nothing beats a subtle over Rev whilst parking )

My friends are saying it will get a little bit louder after a month of usage, did you find that with yours?

I can only compare it to the budget exhaust that I bought the car with. The milltek has a much deeper rumble on idle and low revs. Then sounds smoother and deeper through the the Rev band. I love the little pops it gives whilst dabbing the throttle It's definitly quieter than the cobra (my friend has one fitted to his 350 hr) but Im really enjoying it.

Finally got round to ordering and fitting the exhaust. Went for the milltek in the end and couldn't be more pleased. Looks spot on, sounds really good, and doesn't drone at all on the motorway. Highly recommended

That looks awesome! Much better than my factory fit one, hmm may have to happen soon

Looks great (same colour scheme as myself), is it possible to see a photo of your satnav? I've got the factory fit one in mine, but tempted to update it to an aftermarket one, but still have it look standard. Cheers

Looks really smart í ½í±

Each to their own, I personally wouldn't get them, but they aren't permanent so what's the harm? I'd go for number 1 out of the 3

led interior lights make such a big difference IMO, for very little money. It's one of the first things I do to every car I get now, including the z

Looks awesome!

Hi, is the pop charger still for sale? If so pm me

Cheers for the input guys. Don't want to sound at all disrespectful, but im going to try these cheap ones. They're £17, and no extensive work is requires to fit them. It's a mod I'm looking at doing for a bit of a laugh with my mates. Temporary mod, cheap, and if it's rubbish it will be funny at my small expense. No harm done, and I'll even post pictures for you all to 'enjoy'. Seriously though, wiring them up to the car, would it be a simple job? And where would the best location to wire them to?

So..... This is going well. If everyone liked the same things, the world would be a boring place Any help?

Hey guys, looking at fitting these undercar LEDs to my 350. http://www.amazon.co.uk/dp/B00KA3LGR8/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2W08UZR9NSXOC&coliid=I2C4XI0T7NWTAS&psc=1 My thought process is to try these out as they are cheap and see what I think of them (if they are rubbish, £17 isn't the end of the world, Im aware of 'you get what you pay for'). If I like the look I may invest in higher quality ones. I'm not bothered about all the legality issues as I will not be using them on the open roads. Does any one have any suggestions to which electrical feeds I should wire them to? And would there be easy acess to a terminal box? Thanks for any helpful ideas