clockwize

Hey guys, My headlights are getting cloudy to the point that it might fail the next MOT (I think..). its inside the lights, condensation build up etc.. I've read about baking the lights to break the seal, and then cleaning the inside, refinishing the inside. Good plan or is that a really bad idea? I read something about UV coating or something (which I'd probably polish off)? Don't really want to buy new lights, they're bloody expensive!

I've reached my quota of 350z related purchases this month

Does the crack cause a problem ?

posting to NI is fine, you'll have to cover the cost though

ok definitely will use double sided tape!!

£10?! DAYLIGHT ROBBERY! I expected it to be more than that.. maybe I'll try tape, if its not quite good enough, I'll get one cheers

http://www.ebay.co.uk/itm/170587545637 Anyone know anything about these? Seems pretty cheap and look good..

Ahhh I thought of the spring for the lid which I have, didn't realise there was a metal clip.. Oh well don't think I'll be able to source just the clip so double sided tape will do

I have my OEM 18"s in the 350z for sale section with tyres..

I think the light stays on, as I can't see any way it would know to be on/off depending on the ashtray being open, no switch or anything. I can sit mine right but when I open it, it moves out of position.. will doubled sided tape it later Need to superglue the flap back together as one side snapped during transit (replaced flocked one..)

I also have one you can have cheap.. I must say, I've secured my number plates with double sided tape and have never had a problem.. After years it may come lose at the edge, as the bumper isn't flat, so there is more force pulling it away at the sides, but you can easily notice this and restick it, it'll never just fall off.

I have the passenger airbag cover, but its got black flocking over it. Any use?

Hey, The ashtray in my centre console moves and doesn't seem to clip in to anything, I can't see how it does clip, though I can sit it in the correct place where it looks right and opens correctly.. Before I get the double sided sticky tape out, is there a proper way this is secured in place? Thanks in advance

Do these fit with plenum spacer on DE engine?

Erm is a z supposed to be really responsive in 6th at 40mph? Mine drones and accelerates slowly?

Amongst replacing the whole interior paneling, I've put the finishing touch on my rear strut brace cover - A new Z badge as mine died during prep.. On the interior paneling front, I've had the whole front dashboard and centre console, and the one that runs down the middle with the gear stick, hand brake etc (I'd also call this the centre console?) out over the last few days, replaced it all, I just need to fix the cup holder back in, fix the ashtray (bracket snapped :'() and reconnect the bonnet release mechanism and put the drivers footwell panels back on.. Rest of the interior panels are done except the ones the seatbelt bolts over and the speakers/divider thing.

Good choice and welcome You do realise you'll be modding in no time and end up default on your mortgage?

Sounds like breaking a car is better than selling if you have the time and space lol

Ahh so I was going about it wrong, was trying to unbolt the airbag from the trim first, kind of wanted to not unplug or touch the airbag too much Will it be ok to unplug and reconnect without any Warning light? Do I need to disconnect battery To do it? Thanks for the info

Hey guys, I'm trying to replace the passenger side dashboard trim, which is connected to the airbag. I've managed to get the trim loose but think I need to remove the 6 gold nuts that hold the airbag to the dashboard panel. I've managed to get 4 of them off, but the other 2 are very hard to get to and seem to be impossible to undo given the space restrictions.. Does anyone have experience with this? Do I need to unbolt and remove the stuff below the airbag module to get to those bolts and then put them all back after? Cheers

Still for sale

Ok will give that a go, got my whole dashboard in pieces at the moment, so one thing at a time Cheers

Hey, When I go above 70ish the passenger window seems to drop a tiny bit, enough to break the seal.. I close it and it'll do it again a minute later. Has anyone experienced this? It's doesnt sound quite the same as the other window dropping issues I've read about on here? Cheers

Black is a blank canvas goes with most colours

Thanks guys. Though I'm totally getting rid of the flock with Alfie's panels!