gstraw

It's pretty simple. All the clips you can see. So pull out the sub which is just the screw then pull out the foam which requires removing some of the plastics (not all) plastics are removed by pulling the clips. They are very strong so you need to yank them hard. Sent from my iPhone using Tapatalk

Hmm last I heard they said the 8.5j and 9.5j is a non multi fit so it's only 5x114.3 but I'm looking for slightly wider

Hey mate. I'm looking for the JR-11 in 19 inch. What sizes are the non multifit hole pattern? I'm not a fan of that. I spoke to Japan racing about getting our sizes drilled and they were gonna get back to me but I've not heard anything. Have you heard anything? I'm looking for stock 370z sizes which is 9.5j and 10.5j I think. Maybe 11j on the rear Sent from my iPhone using Tapatalk

I went a step further and removed the sub and all plastics down to bare metal then put the underlay on top of that. Stop the noise at the source. Made a big difference. It's how th car should be however the next road source noise is the arches where the suspension is secured to. I put s bit of underlay over this but couldn't get that much on. I'll send a pic if I find one Sent from my iPhone using Tapatalk

I've seen legit jammers that double up as parking sensors. Hard to see how the plod can jail you for them

Thanks for the replies So is a GPS and laser system the best then? One that doesn't detect radar so it reduces the likihood of false readings if shops use radar a lot? I can use the gps part to find fixed cameras and laser to detect mobile speed traps? Most of the radar ones I've seen have a city setting. What do traffic cops use when they have that big cylinder propped on the roof of their cars pointing backwards? Thanks

Hey is this still available? Is it just gps cameras it detects or also radar guns too?

hey. im looking to get a speed detector. GPS and radar. The valentine One seems like a really good one but its £500!! looking for something like this but less expensive. Alternatively if you have other ones you have used and recommend please share thanks http://www.speedcamerasuk.com/valentine-one-g3.htm

Bump Sent from my iPhone using Tapatalk

19inch? Sent from my iPhone using Tapatalk

The previous owner of my car put the gt edition stripe on. I removed it since I didn't really like it plus it's not s GT edition. Sent from my iPhone using Tapatalk

My mate got me a small orange one. Not sure the ratio. I coloured in sections black to make it look better like the front lip haha Sent from my iPhone using Tapatalk

Oh wow! I'll go take a peak! Sent from my iPhone using Tapatalk

Haha. Persistence is the key to perfection. I've tried all combos now Sent from my iPhone using Tapatalk

Latest video with hfc and one mid silencer out. https://vimeo.com/120691648 Sent from my iPhone using Tapatalk

Look great!

Chris when's the 19s due to arrive? Will the figments be aggressive concave without the multi stud arrangement? Thinking 19x9.5j and 19x11j Sent from my iPhone using Tapatalk

Hey Ross. I wouldn't mind this option plus I'm in Glasgow. Fancy a meet and I can take a look? Sent from my iPhone using Tapatalk

A camera with built in snooper would be ace and clean instead of having 2 devices Sent from my iPhone using Tapatalk

yiykes. did you pay via credit card or paypal? if so you should be protected

Car is pretty much silent again! Even with stock exhaust and hfc it's really quiet. Going back and getting one mid silencer back out so it will be in the middle of what I had vs what I have now

25mm all around. At least if you keep it square any adverse effects shouldn't be an issue since you've increased the track on both front and back by same amount. I've got 25mm all around and it looks great. I went for eibach. Great quality. Last spacers I used were made from a machine shop and the loctite wasn't great

How many miles have they seen?

yeah thats the wires that I peeled back. i'll check again. do you have the 09 model? non touch screen?

Hey Does anyone know for sure which wire is the reverse light? I can't see a green/white wire. I'm gonna wire the camera to the cig lighter then wire the reverse wire on the navtool to the reverse wire which is one of the wires in the boot Iwan where did you connect the reverse wire on your pioneer to? Sent from my iPhone using Tapatalk