Macky

To separate you would need a set of spring compressors, 17mm drop neck spanner and an adjustable spanner. 5 minute job if you have to tools

Haha looks like I've started something here!

I'll have first dibs on these along with the spacers please mate!

Not sure the 3/4 plates are legal, so might be worth getting a cheap standard plate until after your MOT, unless you know the tester of course The block had marked my paint slightly along the top, but luckily I could cover this up with the new plate so you may be alright

Yeah there were 4 holes in total...2 of which were the screw holes and the other 2 were probably slightly larger than a golf ball, with polystyrene behind them. Wish I'd taken a picture now! However, the 3/4 plate covers these without a problem as you can see Thanks mate!

Cheeky little mod, 3/4 plate fitted £17 from fancy plates. I think it looks a lot smoother and smarter without the big ugly block on the front of it! Very happy with it Here's a before and after...

That always seems to happen to me as well! It is very annoying and I always look for dings in my door...been lucky so far though. Park somewhere else ffs! I parked over here for a reason retard!

You don't have to relocate it, you can just unscrew it, unplug it and take the whole thing out You can take the false floor that it's screwed to out too, so it makes the cubby a bit deeper!

You don't have to relocate it, you can just unscrew it, unplug it and take the whole thing out You can take the false floor that it's screwed to out too, so it makes the cubby a bit deeper!

Did this 3 days ago, driven 150 miles since and it seems to have worked for me too! Cheers!

The plastic cover over the nut should come off and allow you to lift it up

Haha awesome! Yeah I saw your stand mate, we had to walk past it every time we went to watch the race We also did the stickers and t-shirt thing...such geeks lol

Ah okay! Thanks Ekona I shall just replace the whole rad to be safe then I think. HaydnH yeah they do put UV or luminous dye in it to make it easier to spot a leak

Hi guys, as title says I have a leak on my air con system. Garage attempted to refill it and told me that the condenser is leaking. I want to do the job myself and just need to confirm I'm going to be replacing the correct bit! The garage told me that the condenser is this large aluminium cylinder at the front of the rad...is this right? Any help would be greatly appreciated!

We were on the corner at the top left as you go in

Just a quick pic of my Zed all stickered up before we drove 550 miles to watch the epic 24hrs of Le Mans!!

I'm driving my zed to this this year Awesome week!

Used this yesterday to adjust my low beam. Very useful guide, cheers!

Used this guide to tighten my aux belts. It's been written so well it makes it simple to follow! Pics are a big help, cheers!

Brilliant guide and it made my Zed so much easier to drive!

Put my name down please! I can't pay until the end of the month though

Also interested!

I've had the same problem in previous cars. There have been some good suggestions, but this is what I used: http://www.ebay.co.uk/itm/251180642109?redirect=mobile Works in a similar way to the pingi one, but isn't rechargeable. It's surprising how much water it collects after being in the car for a while!

Little b******s!! No need for that, things like that really rile me. Hope it's a cheap fix for you mate

Haha no I saw it and thought it was actually really nice! Cheers lads