StevoD

way to rub it in

cant you just by like 30mm wider wings?

as i have nothing btter to do on my sunny sunday with the help of spacer below is the following 245-40-18 18x9.5 et -10 ( the same you will have if you use a 25mm spacer) swap down to a 225-45-18 or 225/40/18 tyres and/or if you can get a 20mm spacer to give enough clearance if not a 225-45-18 should fit maybe a lill arch roll/flare it will have an aggressive stance

better than 90 percent on here genuine 3pc split weds i believe if they're yours - I apologise - but really not to my taste at all not mine but you to appreciate what they are not cheap rotas\xxr or heavy cast 20" konigs or anything like that

better than 90 percent on here genuine 3pc split weds i believe

this setup puts the outside of the wheel 3mm from yours with a 25mm spacer coilovers and stretch is the key

theres cars states side running 11j up front with negative offsets they will go

they will fit just need to research into tyres coilovers

says the person with a drop top mini

yea but due to the deep concave the spokes hit the calliper meaning hes got to run a spacer on a already aggressive set up

http://new.livestrea...true&mute=false livestream

health and safety looks good

yes well fitted to a uk zed

Someone did mention that last night, but not sure how safe that is machining down the brembos wouldnt advise it my self just get some coilovers

http://www.canibeat....on Canibeat.com) 18x11 et-4 must stick out more? will 20mm spacershelp?

NEXT!!! seriously stretch i think is the answer

its the olympic park isnt it

oooooh i like that future car for me i think

to the hornets yea haha scobby grills are apparently rather well made

thats because the legend that was me enter this world and graced the surface of it at that time

there was two stuck in the front grill of me old mans WRX last night

quick cars @*!# load of torque steer quite common for rusting very early 58 plates are showing signs

Seconded

Other than knowing the correct mig feed speed for the thickness of any given material so that said welding doesn't collapse, or the percentages of oxygen to acetylene to avoid a minor, but life altering explosion, I would agree maths has naff all involvement in welding. well your not a welder clearly i would put money i could give you and some one who knows basic maths (gcse grade E) a WPS a Tig and get you to weld a basic 1G weld both results would be similar

hopefully get down there but not sure on parking if it going to cost me more in parking than the event i wont bother ill watch it on live stream with a cider in the garden