Jump to content

14N

Moderators
  • Posts

    6,196
  • Joined

  • Last visited

Everything posted by 14N

  1. Have you tried a direct enquiry via DVLA? You can enquire about a plates availability on their website. If it's available and you express interest, they'll put it in a future auction for you.
  2. Thanks guys, I appreciate your comments and experience. Regarding cost, I'll literally just be paying for the kit (circa £35), the guy (a friend) that'll be doing the wrap will apply it as part of the process - he's not charging me extra to apply the coating. Can't really decline or grumble with that!
  3. Thanks for the offers guys, much appreciated. I really wouldn't want to take a good pair from you, just to split them and butcher just the one. I've managed to bag a single one for £12 so all good Thanks again.
  4. I had a great day, learnt a fair bit and was good to meet some more new faces Thanks Amy for sorting this out. See y'all again soon
  5. This issue seems to be catching! Both Spatt and myself have had exactly the same issue at the same time this past week. Both turned out to be a dodgy coil pack. Matt (Spatt) just replaced all 6 with 6 known good ones from ZMANALEX whereas I followed the suggestion above. Let the car get upto working temperature and start to miss fire/lumpy idle. Unplug (from the connector) each coil pack one by one. If you unplug a 'good' one, the revs will drop noticeably. When you unplug the 'bad' coil pack, there will be no change. It's a bit of a PITA to do, as it's just fiddly. But a little patience and it's an easy DIY job with basic spanner skills. Just remember to plug your MAF back in once done, eh Spatt.......?
  6. Yes. It's essentially a rubberised paint that can be removed. First couple of coats will be a partial covering, but build up the coats like you would paint. Several light coats are better than a few heavy ones. Plenty of vids on YouTube for help
  7. It's not a show and shine event Harry. Given the state of the roads following the amount of rain we have, I doubt anyone's car will be spotlessly clean by the time we all get there. Maybe when we leave, yes, but not when we get there We're all coming along to learn something
  8. See y'all in the morning. Safe trip folks
  9. It's something I was offered as a service as part of a (gloss) wrap. Never heard of it (or the process) before. I'd be keen to hear of the better alternatives please mate.
  10. As title, I'm after the kick plate/sill protector (black plastic thing with the Z badge on you see when you open the door). Really not bothered about condition, or broken clips etc as I really just want the 'Z' badge for an idea I've had. Seen them on eBay for £15-£20, but trying to find one cheaper cos I'm tight.
  11. Anyone have any experience with this product? http://www.elitecarcare.co.uk/carpro-cquartz-uk-ceramic-paint-protection-kit-30ml-2014.php Can also be used as a ceramic coating for vinyl wraps and offers another level of protection and shine (apparently). Anyone used it before (on paint or wrap)?
  12. I'd say it may have been recoloured. Everything you've listed above (gaiters, armrests and seats) is now BMW Alaska Grey in my car. I don't even think cars that came with the frost leather got colour matched arm rests etc.
  13. My vote goes to Plastidip. I did mine as a temporary fix after I demolished my front lip. Very easy to get a good finish, rubberised finish is ideal for the lip that's prone to stone chips, you can peel it off if you change your mind and a whole can (more than enough) is just over a tenner. What's not to like?
  14. My +1 isn't able to make it, so I've added you to their spot Bhav 1) Amyzed 2) Munton87 3) Munton87 +1 4) kbad 5) SUPRAWOOKIE 6) Justthejedi 7) Flex 8)Bradders 9) Mopedmark 10) Dunks 11)Brummiestormer 12) Brummiestormer's Mrs. 13) Kentar0 14) Andy_Muxlow 15) Harryjackson 16) Harryjackson +1 17) jayrishi 18) steve_c123 19) Jay Kay 20) Si 350z 21) Si 350z plus 1 22) 14N 23) Monkeybrain1234 24) Scott_f91 25) Scott_f9 +1
  15. I'm going from memory now (which, has let me down before), but I think you've got the gaiter fitted incorrectly. It should pass underneath the ring(s) you're trying to attach the silver ring to, not over the top. EDIT: There are tabs on the gaiter that are spaced in different locations. By the looks of the stitching on yours, you don't have these in the right place anyway FURTHER EDIT: (Memory is coming back to me). There are two plastic rings that the gaiter sits in that are held together with plastic tabs and these are screwed to the underside of the centre console. Unscrew the two rings (still fixed together) prise them apart (making note of the tabs). You should then see the different location tabs for the gaiter. Pass the gaiter the other side of the rings than you have, locating the pins where they 'should' be (I imagine the stitching will be facing forward and backwards). It's basically a reversal of everything you should of done to remove the original gaiter!
  16. List updated as requested (Amy you'd amended the wrong one) I've also tidied and paired up the +1 situation as it was playing havoc with my OCD 1) Amyzed 2) Munton87 3) Munton87 +1 4) kbad 5) SUPRAWOOKIE 6) Justthejedi 7) Flex 8)Bradders 9) Mopedmark 10) Dunks 11)Brummiestormer 12) Brummiestormer's Mrs. 13) Kentar0 14) Andy_Muxlow 15) Harryjackson 16) Harryjackson +1 17) jayrishi 18) steve_c123 19) Jay Kay 20) Si 350z 21) Si 350z plus 1 22) 14N 23) 14N +1 24) Scott_f91 25) Scott_f9 +1
  17. 1) Amyzed 2) Amyzed plus 1 3) Scott_f9 +1 4) Munton87 5) kbad 6) SUPRAWOOKIE 7) Justthejedi 8) Munton87 +1 9) Flex 10)Bradders 11) Mopedmark 12) Dunks 13)Brummiestormer 14) Kentar0 15) Andy_Muxlow 16) Brummiestormer's Mrs. 17) Harryjackson 18) jayrishi 19) steve_c123 20) Jay Kay 21) Si 350z 22) Si 350z plus 1 23) 14N 24) 14N +1 25) Scott_f91 Added Brummiestormer's Mrs to the vacant slot 16 - everybody's happy
  18. 6828 posts 2170 likes (Which is 'Excellent' apparently). 34.29%
  19. Well that got messy! Updated list below. Two spaces still available Andy, I've inserted you into Kieran's slot (ooer ) as shifting everyone up one space put you into position 13 again! 1. 14N 2. Andy James 3. Z370Z 4. Harryjax 5. davey_83 6. G1en 7. Gumpy000 8. Shezza 9. Max L + 1 10. Brimstoneboy +1 11. Lowrcase 12. Jacob Chaplin 13. SUPRAWOOKIE 14. 15.
  20. 1. 14N 2. 3. Z370Z 4. Harryjax 5. davey_83 6. G1en 7. Gumpy000 8. Shezza 9. Max L + 1 Paid 10. Brimstoneboy +1 pai 11. Lowrcase 12. Jacob Chaplin 13. SUPRAWOOKIE - PAID 14. Andy James paid 15. ASemper List updated. Please note that there is still one space available (Kieran's) as he has defected to the dark side. If you'd like to take this last slot, please contact Kieran
  21. Excellent. You joining us on our stand?
  22. Bump There are still spaces available on our stand. Would be great if we could fill each one.
×
×
  • Create New...